00198168-02_Technical_Training_TX-Series_EN - 第23页
2 Machine Basic Overview 2.4 Machine Configuration Technical Training SIPLACE TX-Series 10/2016 23 TX 2i micron 20/25 µm Machine Configuration Two gantries with same head types: ● C&P20 M2 / C&P20 M2 camera type …
2 Machine Basic Overview
2.4 Machine Configuration
22 Technical Training SIPLACE TX-Series 10/2016
TX 2i Machine Configuration
Two gantries with same head types:
●
C&P20 P / C&P20 P camera type 23 or 41
●
CPP / CPP camera type 30
Table Position:
●
Location 1: Inner
●
Location 2: Inner
Other:
●
No stationary camera
●
No Tray units (JTF)
Feeder Count With C&P20 P With CPP
Location 1 38 40
Location 2 38 40
TX 2 micron 20/25 µm Machine Configuration
Two gantries with same or different head
types possible:
●
C&P20 M2 / C&P20 M2 camera type 41
●
CPP M_H_L / CPP M_H_L camera type
45
●
X-fiducial bar
●
No stationary cameras
●
JTF-ML on Loc.1
Note:
When JTF is used the CPP head must be
mounted in the high position.
Table Position:
EOL application
●
Location 1: Outer
●
Location 2: Inner
Feeder Count With C&P20 M2 With CPP M CPP M with JTF_ML
Location 1 38 40 28
Location 2 38 40 40
2 Machine Basic Overview
2.4 Machine Configuration
Technical Training SIPLACE TX-Series 10/2016 23
TX 2i micron 20/25 µm Machine Configuration
Two gantries with same head types:
●
C&P20 M2 / C&P20 M2 camera type 41
●
CPP M_L / CPP M_L camera type 45
●
X-fiducial bar
●
No stationary cameras
Table Position:
Speed application
●
Location 1: Inner
●
Location 2: Inner
Feeder Count With C&P20 M2 With CPP M
Location 1 38 40
Location 2 38 40
TX 2i micron 15 µm Machine Configuration
Two gantries with same or different head
types possible:
●
C&P20 M2 / C&P20 M2 camera type 41
●
CPP M_L / CPP M_L camera type 45
●
Stiffened lifting table
●
Basic pack vacuumtooling and vacuumtool
with Y-fiducial bar
●
X-fiducial bar
●
No stationary cameras
Table Position:
Speed application
●
Location 1: Inner
●
Location 2: Inner
Feeder Count With C&P20 M2 With CPP M
Location 1 38 40
Location 2 38 40
2 Machine Basic Overview
2.5 Special Features
24 Technical Training SIPLACE TX-Series 10/2016
2.5 Special Features
SIPLACE TX Thermal Management
Process exhaust air:
●
Warm air separated from processing area
●
Outlet of exhaust air in centralized position
●
Fans status monitored by software
TX micron Special Features
●
The TX micron machines will be equipped with two X fiducial bars parallel to the conveyor
close outside of the conveyor rails on the standard conveyor. On each location one specific
calibration jig holder and a separate zero point fiducial.
●
TX micron 15µm with the option “Basic pack vacuum tooling” and the license for 15µm / 3s
will be deliever with stiftness lifting table.