00198168-02_Technical_Training_TX-Series_EN - 第252页
10 Station Software Overviews 10.9 Station GUI Shuttle Extension 252 Technical Training SIPLACE TX-Series 10/2016 10.9 Station GUI Shuttle Extension 1. Click Setup menu. 2. Select the SIPLACE Shuttle Extension on the out…
10 Station Software Overviews
10.8 Embedded software (eSW) download
Technical Training SIPLACE TX-Series 10/2016 251
10.8 Embedded software (eSW) download
1. The function Embedded software
Download can be performed with the
operation levels Machine Service.
2. Switch over to the Service menu.
3. Select the button Embedded Software.
1. Select Update machine to check the
entire machine and to perform an eSW
download for multiple subsystems.
2. Select Update Subsystem to select and
check one subsystem, to perform an eSW
download.
3. Select Version information to view all
versions of the subsystems, BIOS and
application.
1. Selection button, machine part to be
checked.
2. Click Reset.
3. Click Next to continue and to view the
currently installed and available versions.
1. This area displays the status of the
individual subsystems.
2. This column displays update information
about the number of subsystems which still
have to be downloaded.
3. Start embedded software update starts
the download.
10 Station Software Overviews
10.9 Station GUI Shuttle Extension
252 Technical Training SIPLACE TX-Series 10/2016
10.9 Station GUI Shuttle Extension
1. Click Setup menu.
2. Select the SIPLACE Shuttle Extension on
the output conveyor.
3. Click Location menu.
4. Select the SIPLACE Shuttle Extension on
the input conveyor.
1. Select the SIPLACE Shuttle Extension on
the output conveyor
2. Select the SIPLACE Shuttle Extension on
the input conveyor.
3. This button stops the automatic operation
of the Shuttle Extensions, single functions
can be executed.
4. This button starts the automatic operation
of the Shuttle Extensions i.e. meaning that
the boards which arrive at the Shuttle
Extension are transported through and
then passed on to the next machine,
according to the configuration.
5. This button shows the current state of the
signal transmitter (laser light barrier). The
LED symbol shows whether there is a
board in the Shuttle Extension or, in other
words, whether the signal transmitter
(laser light barrier) has triggered.
10.10 Excercise: Station Software Overviews
1. What is the best answer regarding the maintenance GUI in SW 709?
A Maintenance GUI can be used for machine maintenance and head verification.
B Camera, feeder and conveyor rail verification is integrated into maintenance GUI.
C Maintenance GUI can show predictive information, to help customers do the maintenance on
time, reduce unplanned downtime.
D All of the above.
10 Station Software Overviews
Room for Your Sketches and Notes
Technical Training SIPLACE TX-Series 10/2016 253
Room for Your Sketches and Notes