00198168-02_Technical_Training_TX-Series_EN - 第254页
10 Station Software Overviews Room for Your Sketches and Notes 254 Technical Training SIPLACE TX-Series 10/2016
10 Station Software Overviews
Room for Your Sketches and Notes
Technical Training SIPLACE TX-Series 10/2016 253
Room for Your Sketches and Notes
10 Station Software Overviews
Room for Your Sketches and Notes
254 Technical Training SIPLACE TX-Series 10/2016
11 JTF-ML
11.1 JTF (JEDEC Tray Feeder) - General Overview
Technical Training SIPLACE TX-Series 10/2016 255
11 JTF-ML
11.1 JTF (JEDEC Tray Feeder) - General Overview
The JTF (JEDEC Tray Feeder) is an option for feeding tray package component.
Tray feeder Unit
●
Only at location
●
In combination with CPP M head in high position.
●
Magazine for 14 and 18 trays available
●
Connection to machine from the side
●
28 feeder slots left next to tray unit
●
An output extension conveyor will be offered with a length 600 mm
●
A special changeover table is required.
●
The tray unit can be removed easily. When removing only the tray unit and not the
changeover table the free space can be used for all non-tape feeders as LDU-X or
GlueFeeder. If the full feeder capacity shall be used for tape feeder also table and tape empty
guidance need to be exchanged.
General Features
●
Magazines for 18 thin JEDEC Standard Trays and 14 JEDEC Thick Trays for higher
components.
●
CPU controlled.
A - Backside (inside)
B - Front side (outside)
1. Tray clamp (X&Y)
2. Conveyor
3. Return pusher
4. Feeder base
5. Connection cable and hose
6. Operation panel
7. Operation cover