00198168-02_Technical_Training_TX-Series_EN - 第85页
5 Placement Heads 5.1 CPP Head Technical Training SIPLACE TX-Series 10/2016 85 5.1.9.2 CPP Head - Maintenance Maintenance task Multistar CPP Interval Equipment required Replacing the Pressure Control Valve Workflow 3 ● T…
5 Placement Heads
5.1 CPP Head
84 Technical Training SIPLACE TX-Series 10/2016
No. Code Error Description Possible Cause Action
9 30524 Cannot reference DP
axis, segment:
DP drive defect
●
Inspect DP drive and
replace it if necessary
●
Check error chain
messages
10 30573 Skipping segment after
positioning error,
segment:
●
DP drive high
temp
●
DP drive defect
●
Try to enable relevant DP
drive, Inspect DP drive and
replace it if necessary
●
Check error chain
messages
11 30624 Nozzle scan failed
●
Dirty nozzle
●
Air kiss too low
●
Inspect nozzle and replace
it if necessary
●
Check error chain
messages
●
Check air kiss circuit
34401 Cannot scan nozzle
33368 Nozzle scanning
unsuccessful
5 Placement Heads
5.1 CPP Head
Technical Training SIPLACE TX-Series 10/2016 85
5.1.9.2 CPP Head - Maintenance
Maintenance task Multistar CPP Interval Equipment required
Replacing the Pressure Control Valve Workflow 3
●
Torque screwdriver ESD 0,4 – 1,0Nm
●
Torque allen swap blade 2mm
●
Torque allen swap blade 3mm
Check/replace the silencer Workflow 3
●
Silencer CPP
Cleaning the Holding Circuit Housing Workflow 3
●
Anti-static tweezers, Bernstein 5-192
●
Gasket Kit Retaining Circle/CPP
●
Cleaning sticks
●
Cleaning wipe, KM-wipe
Replacing the O-Rings Holding Circuit Workflow 3
●
Double wrenches size 17x19
●
Torque screwdriver ESD 0,1-0,6Nm
●
Torque allen swap blade 1,5mm
Cleaning the Screwed Joint Workflow 3
●
Anti-static tweezers Bernstein 5-192
●
Gasket Kit Retaining Circle/CPP
●
Cleaning wipe, KM-wipe
Only required for heads with service
hole at the inside of the front plate
Workflow 3
●
Multipette M4
●
Combitips advanced 0,1ml yellow
●
Cleaning wipe, KM-wipe
●
Klueberoil GEM 1 220N 50ml (yellow)
Oiling the Z Axis Linear Guide Workflow 3
●
Multipette M4
●
Combitips advanced 0,1ml blue
●
Torque screwdriver ESD 0,4-1,0Nm
●
Torque allen swap blade 2mm
●
Cleaning wipe, KM-wipe
●
Lubcon Thermoplex ALN 1001/00,
50ml (blue)
●
Cleaning sticks
Checking/Replacing the DP Vacuum
Hoses
Workflow 3
●
Point Pliers 140mm oval
●
Hose Dp / CPP 12x
Cleaning the Light Barrier on the DP
Drive
Workflow 3
●
Anti-static tweezers
●
Bernstein 5-192
●
Isopropanol
●
Cleaning sticks
●
SM Role labels 9x5 black flat
Oiling the DP Segment Guide Workflow 3
●
Multipette M4
●
Combitips advanced 0,1ml blue
●
Cleaning wipe, KM-wipe
●
Lubcon Thermoplex ALN 1001/00,
50ml (blue)
●
Cleaning sticks
5 Placement Heads
5.1 CPP Head
86 Technical Training SIPLACE TX-Series 10/2016
Maintenance task Multistar CPP Interval Equipment required
Oiling the DP Driver Bearing Workflow 3
●
Multipette M4
●
Combitips advanced 0,1ml black
●
Cleaning wipe, KM-wipe
●
Klueberalfa DH 3-100, 50ml (black)
●
Cleaning sticks
Maintain the holding circuit Workflow 3
●
Multipette M4
●
Combitips advanced 10ml orange
●
Cleaning wipe, KM-wipe
●
Ultrasound device FA Bandelin 327
●
Ultrasonic Cleanser Alsar 25 NKF
●
Deionized distilled water
●
Compressed air
Maintain the PRV Workflow 3
●
Torque screwdriver ESD 0,1-0,6Nm
●
Wrench socket size 8-1/4"
●
POINT PLIERS 140mm OVAL
●
Screwdriver flathead
●
Indented cross blade PH1
●
O-Ring I3601 B-1,5X1,08-N-NBR70
●
Cleaning wipe, KM-wipe
●
Isopropanol
●
ISOFLEX Topas 5051 50ml ((green)
●
Compressed air
●
Cleaning sticks
Replacing the Filter Disks Workflow 3
●
Tweezers for filterdisc CPP
●
Filter disc cpl./CPP
Oiling the Star Bearing Workflow 3
●
Hexagon socket head CAP
screwdriver
●
Multipette M4
●
Combitips advanced 0,1ml green
●
Lubric.application tool star bearing
CPP
●
Cleaning wipe, KM-wipe
●
ISOFLEX Topas 5051 50ml ((green)
Cleaning the Component Sensor Workflow 3
●
Component-Sensor protectiv cover/
CPP
●
Isopropanol
●
Cleaning sticks
For detailed information refer to the maintenance Job Cards for the CPP Head.