TR7600 SIII_Series_Maintenance_en_v_2_0_3 - 第40页
Test Research, Inc. 30 TR7600 SI II Series User Guide – Maintenance Figure 48: Apply Grease to Cloth Figure 49: App ly Cloth to Track & Linear Guide Figure 50: Apply Grease to Ball Screws
Test Research, Inc.
TR7600 SIII Series User Guide – Maintenance 29
6 M
ONTHLY
M
AINTENANCE
Warning: Except for the parts specifically mentioned, the power
MUST be turned off during maintenance. Failure to do so may cause
mechanical or electrical damage.
Besides the daily and weekly maintenance activities, users also need to perform
maintenance activities discussed below during monthly maintenance.
6.1 Clean and Test All Sensors
Clean all sensors and test if the sensitivity is properly adjusted. Also check the interlock
sensors signal to ensure the sensors are working properly.
Figure 47: Check Sensor Sensitivity
6.2 Lubricate Conveyor, Ball Screws and Linear Guides
Clean the linear guides, conveyor track and ball screws. After cleaned, apply grease on the
track, ball screws and linear guides to lubricate them.
Test Research, Inc.
30 TR7600 SIII Series User Guide – Maintenance
Figure 48: Apply Grease to Cloth
Figure 49: Apply Cloth to Track & Linear Guide
Figure 50: Apply Grease to Ball Screws
Test Research, Inc.
TR7600 SIII Series User Guide – Maintenance 31
6.3 Clean Back Fans
Clean the dust on the back fans with a compressed air gun.
6.4 Clean Main PC Dust Filter and Fan
Use compressed air gun to clean dirt and dust on Main PC filter and fan in order to prevent
the computer from overheating.
Figure 51: Use Air Gun to Clean Dirt and Dust
6.5 Clean LCD Monitor
Use a clean soft cloth to wipe the LCD Monitor.