TR7600 SIII_Series_Maintenance_en_v_2_0_3 - 第5页
Test Research, Inc . TR7600 SI II Series User Guide – Maintenance i WARNING: Risk of electric shock and mechanical injury. O nly full y trained per sons should b e allow ed to t ake par t in the i nstallation process. WA…
Test Research, Inc.
TR7600 SIII Series User Guide – Maintenance
Safety
Before starting the machine, personnel involved in the machine operation, maintenance or
service must understand and follow these points:
1) This machine is designed to automatically inspect PCB via X-ray scanning and
algorithms.
2) The machine must be operated by qualified personnel only. Qualified personnel should
meet the following qualifications:
Have normal depth perception, field of vision, reaction time, manual dexterity,
coordination, and no tendency to dizziness.
Completed operators training.
3) All personnel involved in machine operation must understand the use of the emergency
stop buttons.
4) Anyone operating this machine must obey the warning signs.
5) Ensure that all covers and shields are intact, mounted, and closed while the machine is
in operation.
6) Do not disable or disengage any safety switch or sensor.
Personal Safety Equipment
The correct operation of this machinery does not require any Personal Safety Equipment.
Physical Safety Hazards
1) Noise Level: The noise levels of the machinery are of <80dB with frequency between
20Hz - 20 kHz in accordance to Taiwan Noise Control Act, Article 4 (Noise control
standards for factory plants or sites - Class 4)
2) Radiation Level: For all X-ray inspection equipment manufactured by TRI, under normal
conditions the radiation dose at 5cm distance from any cabinet outer wall should not
exceed 0.5µSv/h.
Note: Before operating the AXI machine, please ensure that you have read and
understand the Health and Safety Manual.
Test Research, Inc.
TR7600 SIII Series User Guide – Maintenance i
WARNING: Risk of electric shock and mechanical injury. Only fully
trained persons should be allowed to take part in the installation
process.
WARNING: Do not reach in the machine when it is operating.
WARNING: When TRI created the test system software CD, it
contained no known viruses. The software on the TRI CD was checked
by the latest anti-virus software before being copied to the disk.
Customers should use a good, up-to-date virus checker on this TRI
software, and any other file you import from an outside source before
using the software. Please also ensure your virus checker’s data files
are up to date.
Test Research, Inc.
ii TR7600 SIII Series User Guide – Maintenance
Contents
1
I
NTRODUCTION
________________________________________________ 1
1.1 Front View of the System ................................................................................... 2
1.2 Enlarged View of the Control Panel ................................................................... 3
1.3 Rear View of the System ................................................................................... 4
1.4 Interior View of the System ................................................................................ 5
1.5 Upper X-Y Table................................................................................................. 6
1.6 Lower X-Y Table................................................................................................. 6
1.7 Left Side View of the System ............................................................................. 7
1.8 Right Side View of the System........................................................................... 8
2
S
AFETY
L
ABEL
________________________________________________ 9
2.1 Introduction of Safety Labels ............................................................................. 9
2.2 Position of Safety Labels ................................................................................. 11
3
W
ARM
U
P
___________________________________________________ 13
4
D
AILY
M
AINTENANCE
__________________________________________ 20
4.1 Check Main Power and All Cables Connection ............................................... 20
4.2 Test Signal Tower ............................................................................................ 21
4.3 Check Emergency Stop ................................................................................... 22
4.4 Check Interior Safety Lock ............................................................................... 22
4.5 Check the Gate Movement .............................................................................. 23
4.6 Check Back Fans Operating ............................................................................ 23
4.7 Clean Front Cover Screen ............................................................................... 24
4.8 Clear Objects inside Machine .......................................................................... 24
4.9 Check Environment .......................................................................................... 25
5
W
EEKLY
M
AINTENANCE
________________________________________ 26
5.1 Check Motor and Sensor Connections ............................................................ 26
5.2 Clean Conveyor Belt and Wheels .................................................................... 26
5.3 Clean Water Container of Air Control Valve .................................................... 27
5.4 Check Pressure of the Main Air Control Valve ................................................ 27
5.5 Check the Key Switch Process ........................................................................ 28
5.6 Clean Flux on Conveyor................................................................................... 28
5.7 Clean Accumulate Lubricant ............................................................................ 28
6
M
ONTHLY
M
AINTENANCE
_______________________________________ 29