00193891-0702_AI_LP_Barcode_DE EN - 第153页
SIPLACE 2 PCB barcode scanner assembly instructions 10/2009 Edition 2.7 Installing the PCB barcode scanner 153 : Screw the adapter plate abo ve (PCB barcode scanner top side) or below th e input belt (PCB barcode scanner…
2 PCB barcode scanner assembly instructions SIPLACE
2.7 Installing the PCB barcode scanner 10/2009 Edition
152
: To do this, loosen the following screws:
Detach grounding terminal
Loosen and remove screw
Loosen and remove screw
Loosen screws
Detach connections
2
: Remove the side section of the input belt (extension kit).
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.7 Installing the PCB barcode scanner
153
: Screw the adapter plate above (PCB barcode scanner topside) or below the input belt (PCB
barcode scanner underside) using 2 hexagon socket head screws on the left and right.
Screw on the adapter plates through the top holes.
2
If the screws are hard to tighten, tighten them first without the rail and then loosen them again.
This will break the paint in the screw holes. 2
Top holes for rail under-
neath with 2D scanner
Adapter plates
Bottom holes for rail on top
with 2D scanner
2
2
2
2 PCB barcode scanner assembly instructions SIPLACE
2.7 Installing the PCB barcode scanner 10/2009 Edition
154
: Screw on the rail with the locating holes above (PCB barcode scanner topside) or below the
input belt (PCB barcode scanner underside) using 2 hexagon socket head screws on the left
and right.
Fix the rail (using the outer slots)
2
2
: Reverse the above sequence to refit the side section of the input area (rucksack).
2
2
2
2
2
2
2
2
2