00193891-0702_AI_LP_Barcode_DE EN - 第204页
Lw1 Connector 1 Connector 2 Dimensions / cable type Cable W1 dimensions Basic length acc. to parts list Assembled overall length / tolerance Inscription label Cable type: Option: Material number: Lw1 L3w1 L in mm Strippe…
Distributor f. PCB barcode scanner 00372356-xx
Barcode scanner
top
Conveyor track 1
Barcode scanner
bottom
Conveyor track 1
Barcode scanner
top
Conveyor track 2
Barcode scanner
bottom
TConveyor track 2
If no barcode scanner is connected to X1 ... X4,
Use caps to cover slots that are not used.
PCB barcode, conveyor track 1
Machine controller
PCB barcode, conveyor track 2
Wiring for S/F PCB barcode scanner
GN
BN
WH
YE
X212/4
X2kc:7
X212/3
X2kc:4
Connecting the terminal panel (left-hand side)
+24V
IO terminal A2 (Start signal, track 1)
GND
IO terminal A2 (Start signal, track 2)
03022166-xx
Extension kit
Replace grounding cable 00310192-xx by 03022166-xx.
Frame
Distributor grounding terminal
make sure to set the associated switch contact 1 ... 4 at S1 to ON.
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.9 Electrical drawings
203
2
Fig. 2.9 - 4 Wiring for the S-27 HM / D1 / D2 PCB barcode scanners (03016203-010301)
Lw1
Connector 1
Connector 2
Dimensions / cable type
Cable W1 dimensions
Basic length acc. to parts list
Assembled overall length / tolerance
Inscription label
Cable type:
Option:
Material number:
Lw1
L3w1
L in mm
Stripped length
L1w1
L2w1
L1w1 L3w1
L2w1
Dimension / connector designation / labeling
The arrow always points to the upper left corner of the inscription label.
For details concerning the inscription and design of the labels,
please refer to the inscription guidelines for cable sets which you will find included in the parts list.
Wire connection technology
A: Wire end ferrule
C: Crimp contact
C/So: Crimp contact, socket
C/CO: Crimp contact, connector
F: Flat pin bushing
L: Soldered joint
CR: Cable lugs (ring-type)
CP: Cable lugs (pin)
CF: Cable lugs (fork-type)
SA: Screen assembly
Unitronic LIYCY, 6x0.25mm²
03016827-xx
30
100
3000/+50
3100
30
bk
Screen with connector 2/pin 5
and connector 3/pin 6 connected.
Solder onto screen
Fit screen to SUB-D
Casing with contact sleeve
A6107
Connector 1
w1
Connector 1, connector 2
Orientation of the cable exit
Connector 3
Connector 2
Connector 3
Shrink-fit sleeve
upto and in the connector casing
Coding pin (for connector 1)
w1
w1
Sheath end shrink-fitted,
Length for shrink-fitted sleeve approx. 20mm
bk
beneath the shrink-fit sleeve
2 PCB barcode scanner assembly instructions SIPLACE
2.9 Electrical drawings 10/2009 Edition
204
2
Fig. 2.9 - 5 Cable: distributor for the S-27 / D1 / D2 PCB barcode scanners (03016827-010102FD3
Distributor f. PCB barcode scanner 00372356-xx
Barcode scanner
top
Barcode scanner
bottom
Conveyor control
(ao) 00329219-xx TSP100
03021617-xx
Pin 1
X3 ao
Pin 1
Please note X3 connector polarity!
X23
HS50 wiring for single conveyor with TSP100 conveyor control (00329219-xx):
If no barcode scanner is connected to X1 ... X4,
03022264-01
Extension kit
Frame
Distributor grounding terminal
make sure to set the associated switch contact 1 ... 4 at S1 to ON.
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.9 Electrical drawings
205
2
Fig. 2.9 - 6 Wiring for HS-50 SC with TSP 100 (00329219-xx) (03016491-010201)