00193891-0702_AI_LP_Barcode_DE EN - 第215页
Distributor f. PCB barcode scanner 00372356-xx Barcode scanner top Conveyor track 1 Barcode scanner bottom Conveyor track 1 Barcode scanner top Conveyor track 2 Barcode scanner bottom T Conveyor track 2 Control assy , PC…
W1
H05V-K, UL-CSA 2.5 mm² gnye
Wire color / wire no. Type Cross-section / hole
gnye 2.5-6 mm² / 5 CR
Important:
Shrink cables separately when they are not connected.
Wire connection technology
A: Wire end ferrule
C: Crimp contact
C/So: Crimp contact, socket
C/CO: Crimp contact, connector
F: Flat pin bushing
L: Soldered joint
CR: Cable lugs (ring-type)
CP: Cable lugs (pin)
CF: Cable lugs (fork-type)
SA: Screen assembly
Side1
Connection technology
Wire color / wire no. Type Cross-section / hole
gnye 2.5-6 mm²F
Side 2
Connection technology
Dimension / connector designation / labeling
The arrow always points to the upper left corner of the inscription label.
For details concerning the inscription and design of the labels,
please refer to the current TBL (technical ordering designations and terms of supply).
Dimensions / cable type
Cable W1 dimensions
Basic length acc. to parts list
Assembled overall length / tolerance
Inscription labels
Cable type:
Option:
Material number:
Lw1
L1w1
L in mm
Wiring
03022264-01
400
400 +/-20
Side1
Side 2
Lw1
L1w1
100 +/-20
2 PCB barcode scanner assembly instructions SIPLACE
2.9 Electrical drawings 10/2009 Edition
214
2
Fig. 2.9 - 15 Grounding cable for distributor for PCB barcode scanner HS-50 / HS-60 (03022264-010101)
Distributor f. PCB barcode scanner 00372356-xx
Barcode scanner
top
Conveyor track 1
Barcode scanner
bottom
Conveyor track 1
Barcode scanner
top
Conveyor track 2
Barcode scanner
bottom
TConveyor track 2
Control assy, PCB conveyor (single conveyor: 00365543-xx, dual conveyor: 00365544-xx)
Conveyor control, track 1
(ao) 00370397-xx
Conveyor control, track 2
(ap) 00370398-xx
(for dual conveyor only)
If no barcode scanner is connected to X1 ... X4,
Use caps to cover slots that are not used.
PCB barcode, conveyor track 1
PCB barcode, conveyor track 2
S1
00365548-xx
W4
00370329-xx
Ground connection for assembly trough
From PCB conveyor
03012664-xx
make sure to set the associated switch contact 1 ... 4 at S1 to ON.
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.9 Electrical drawings
215
2
Fig. 2.9 - 16 Wiring: PCB barcode for the HF series / X-series / D3 (03012668-010101)
Wire color / wire no. Type Cross-section / hole
gnye 1.5 mm² / 5 F
Important:
Shrink cables separately when they are not connected.
Wire connection technology
A: Wire end ferrule
C: Crimp contact
C/So: Crimp contact, socket
C/CO: Crimp contact, connector
F: Flat pin bushing
L: Soldered joint
CR: Cable lugs (ring-type)
CP: Cable lugs (pin)
CF: Cable lugs (fork-type)
SA: Screen assembly
Side 1
Connection technology
Wire color / wire no. Type Cross-section / hole
gnye 1.5 - 2.5 mm² / M4CR
Side 2
Connection technology
Side 1
Side 2
Lw1
L2w1
90
Dimension / connector designation / labeling
The arrow always points to the upper left corner of the inscription label.
For details concerning the inscription and design of the labels,
please refer to the current TBL (technical ordering designations and terms of supply).
Dimensions / cable type
Cable W1 dimensions
Basic length acc. to parts list
Assembled overall length / tolerance
Inscription labels
Cable type:
Option:
Material number:
Lw1
L2w1
L in mm
Wiring
03012264-01
200
180/+10
W1
H05V-K, UL-CSA 1.5 mm² gnye
2 PCB barcode scanner assembly instructions SIPLACE
2.9 Electrical drawings 10/2009 Edition
216
2
Fig. 2.9 - 17 Grounding cable: PCB barcode scanner distributor, HF (03012664-010101)