00193891-0702_AI_LP_Barcode_DE EN - 第226页
2 PCB barcode scanner assembly instructions SIPLACE 2.11 PCB barcode scanner configuration 10/2009 Edition 226 : Make sure that, und er "Destination of result dat a strings" the 'Asynch. Host Interfa ce&ap…

SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.11 PCB barcode scanner configuration
225
: Select the scan code in the ’Code conf.’ box.
Fig. 2.11 - 11 Configure barcode types
: Click on the barcode types to be read by the 1D barcode scanner.
: You can leave the settings in the ’Host Interface’ window
unchanged since you will not be es-
tablishing an online connection with the barcode scanner.
Fig. 2.11 - 12 Host interface

2 PCB barcode scanner assembly instructions SIPLACE
2.11 PCB barcode scanner configuration 10/2009 Edition
226
: Make sure that, under "Destination of result data strings" the 'Asynch. Host Interface' option is
selected so that the data will be analyzed and displayed by the station.
: Select the ’Data Strings’ window and enter the following values
-
in the ’Header’ box: /GN
- in the ’Terminator’ box: CR
Please note:
If the 1D or 2D barcode scanner is used on Siplace machines with p
latform 1 software, then a "CR"
must be entered for "Terminator".
NOTE:
Do not enter these values using the keyboard; simply click on
the ’Header’ box and the table will
appear.
: Enter the character / on the input line using the keyboard and click on GN.
: Click on O
K.
: Click on the ’Terminator’ box and accept the value CR from the table.
Fig. 2.11 - 13 Data string setting
: In the menu, click on the 'Profiles' pulldown menu.
: Select the 'Printer option' menu

SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.11 PCB barcode scanner configuration
227
: In the 'Barcode Printing Options' window, click on the 'Barcode dimensions' box.
Fig. 2.11 - 14 Printer settings
NOTE:
For the CLV 41x barcode scanner, the number of barcodes per page is 5.
For the CLV 42x barcode scanner, the number of barcodes per page is 8.
Fig. 2.11 - 15 Layout settings