00193891-0702_AI_LP_Barcode_DE EN - 第268页
2 PCB barcode scanner assembly instructions SIPLACE 2.12 Tips & tricks for the barcode scanner 10/2009 Edition 268 2 2 If it proves nec essary to ente r a delay at the start of the cycle, this can be done in the box …
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.12 Tips & tricks for the barcode scanner
267
2
It is also important that the scanner hardware is connected at the correct slot of the HUB and that
the DIP switches are set correctly. 2
Scanners connected to the barcode distributor must be set to
"OFF" at the DIP switch, scanners not connected to the bar-
code distributor must be set to "ON".
2
2
2
2
2
2
2
2 PCB barcode scanner assembly instructions SIPLACE
2.12 Tips & tricks for the barcode scanner 10/2009 Edition
268
2
2
If it proves necessary to enter a delay at the start of the cycle, this can be done in the box highlights
above. It must be noted, however, that any barcodes located at the start of a PCB will not be read.2
2
2
The Data matrix menu should be used to define as many settings as possible. 2
Every defined value reduces the analysis time, which may becom
e critical with low-contrast or dif-
ficult to read codes. 2
2
2
SIPLACE 2 PCB barcode scanner assembly instructions
10/2009 Edition 2.12 Tips & tricks for the barcode scanner
269
2
2
2