Micron Maintenance Manual - 第3页
3 MAINTENANCE MANUAL MICRON 11/2017 Table of Contents TABLE OF CONTENTS 1 PREVENTIVE MAINTENANCE 7 1.1 MACHINE INFORMATION 7 1.1.1 Monthly Maintenance Completed 7 1.2 INTRODUCTION 8 1.2.1 Safety 8 1.2.2 Material Safety D…
The legal form of this notice can be read at www.asm-smt.com/disclaimer
This information is provided in good faith; it is believed to be accurate and sufficient for the intended purpose
This information remains the property of ASMAS Group
ASMAS Group are not liable for the consequences of applying this information
ASMAS Group are free to alter this information without notice
We have reviewed the contents of this publication to ensure consistency with the hardware and software de-
scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-
tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Singapore Pte Ltd Group
ASM Assembly Systems Weymouth Ltd
11 Albany Road
Granby Industrial Estate
Weymouth, Dorset
DT4 9TH, England
Item no.: 167152 Issue 3
www.asm-smt.com Printed by ASM Assembly Systems
®
TM TM TM TM TM TM TM
DirEKt Ball Placement , Grid-Lok , HawkEye , Interactiv , ProFlow , PumpPrinting and VectorGuard
are trademarks of ASM Assembly Systems Pte Ltd.
Microsoft and MS-DOS are registered trademarks of Microsoft Inc.
Windows 7 and Standard Embedded is a trademark of Microsoft Inc.
All other brand and product names are trademarks or registered trademarks of their respective holders.
is a registered trademark of ASM Assembly Systems Pte Ltd.
Please note the following:
3MAINTENANCE MANUAL MICRON 11/2017
Table of Contents
TABLE OF CONTENTS
1 PREVENTIVE MAINTENANCE 7
1.1 MACHINE INFORMATION 7
1.1.1 Monthly Maintenance Completed 7
1.2 INTRODUCTION 8
1.2.1 Safety 8
1.2.2 Material Safety Data Sheets 8
1.2.3 Philosophy 8
1.2.4 The Preventive Maintenance Schedule 8
1.2.5 Disposal Of Waste Materials 9
1.2.6 Warranty 9
1.3 CLEANING AND LUBRICATION 9
1.3.1 Cleaner Part Numbers 9
1.3.2 Lubrication Chart 10
1.3.3 Linear Bearings And Guide Rails 10
1.3.4 Ballscrews 10
1.4 MAINTENANCE PLAN 10
1.4.1 Module 1 11
1.4.2 Module 2 11
1.4.3 Accuracy Check 12
1.4.4 SPC Results 12
1.4.4.1 Examining The Collected Data 12
1.4.4.2 Authorization 12
1.5 MONTHLY MAINTENANCE 12
1.5.1 SPC Alignment Check 13
1.5.2 Machine Cycle Count 13
1.5.3 Maintenance Procedure For Month 1 14
1.5.3.1 SPC Alignment Check And Machine Cycle Count 14
1.5.3.2 Software 14
1.5.3.3 Monthly Maintenance 14
1.5.3.4 Monthly Hardware Check 16
1.5.4 Maintenance Procedure For Month 2 17
1.5.4.1 SPC Alignment Check And Machine Cycle Count 17
1.5.4.2 Software 17
1.5.4.3 Monthly Maintenance 17
1.5.4.4 Monthly Hardware Check 19
1.5.5 Maintenance Procedure For Month 3 21
1.5.5.1 SPC Alignment Check And Machine Cycle Count 21
1.5.5.2 Software 21
1.5.5.3 Monthly Maintenance 21
1.5.5.4 Monthly Hardware Check 23
1.5.6 Maintenance Procedure For Month 4 25
1.5.6.1 SPC Alignment Check And Machine Cycle Count 25
1.5.6.2 Software 25
1.5.6.3 Monthly Maintenance 25
1.5.6.4 Monthly Hardware Check 27
1.5.7 Maintenance Procedure For Month 5 29
1.5.7.1 SPC Alignment Check And Machine Cycle Count 29
1.5.7.2 Software 29
1.5.7.3 Monthly Maintenance 29
1.5.7.4 Monthly Hardware Check 31
1.5.8 Maintenance Procedure For Month 6 32
1.5.8.1 SPC Alignment Check And Machine Cycle Count 32
1.5.8.2 Software 32
4 MAINTENANCE MANUAL MICRON 11/2017
Table of Contents
1.5.8.3 Monthly Maintenance 32
1.5.8.4 Monthly Hardware Check 35
1.5.9 Maintenance Procedure For Month 7 36
1.5.9.1 SPC Alignment Check And Machine Cycle Count 36
1.5.9.2 Software 36
1.5.9.3 Monthly Maintenance 36
1.5.9.4 Monthly Hardware Check 38
1.5.10 Maintenance Procedure For Month 8 39
1.5.10.1 SPC Alignment Check And Machine Cycle Count 39
1.5.10.2 Software 39
1.5.10.3 Monthly Maintenance 39
1.5.10.4 Monthly Hardware Check 41
1.5.11 Maintenance Procedure For Month 9 43
1.5.11.1 SPC Alignment Check And Machine Cycle Count 43
1.5.11.2 Software 43
1.5.11.3 Monthly Maintenance 43
1.5.11.4 Monthly Hardware Check 45
1.5.12 Maintenance Procedure For Month 10 47
1.5.12.1 SPC Alignment Check And Machine Cycle Count 47
1.5.12.2 Software 47
1.5.12.3 Monthly Maintenance 47
1.5.12.4 Monthly Hardware Check 49
1.5.13 Maintenance Procedure For Month 11 51
1.5.13.1 SPC Alignment Check And Machine Cycle Count 51
1.5.13.2 Software 51
1.5.13.3 Monthly Maintenance 51
1.5.13.4 Monthly Hardware Check 53
1.5.14 Maintenance Procedure For Month 12 54
1.5.14.1 SPC Alignment Check And Machine Cycle Count 54
1.5.14.2 Software 54
1.5.14.3 Monthly Maintenance 54
1.5.14.4 Monthly Hardware Check 56
2
CLEANING, LUBRICATION AND MAINTENANCE DIAGRAMS 57
2.1 RISING TABLE STYLE 1 57
2.2 RISING TABLE STYLE 2 58
2.3 PASTE DISPENSER 59
2.4 BOARD AT STOP OPTO 60
2.5 PRINT CARRIAGE 61
2.6 CAMERA SYSTEM (ROTARY) 62
2.7 CAMERA SYSTEM (LINEAR) 63
2.8 CHASE OMNI TRACK BEARINGS 64
2.9 MACHINED C CHASE 65
2.10 ADJUSTABLE STENCIL MOUNT (ASM) 66
2.11 ADJUSTABLE WIDTH STENCIL MOUNT (AWSM) 67
2.12 STENCIL ACTUATORS 68
2.13 STENCIL CHANGE MECHANISM 69
2.14 SQUEEGEE MECHANISM 70
2.15 PROFLOW 71
2.16 RAIL SYSTEM 72
2.17 UNDER STENCIL CLEANER 73
2.18 EXTERNAL SOLVENT TANK 74