00198536-02_AI_Mixed-Mode_TX2iV1_TX2V2_de_en - 第84页

2 Brief description 2.2 Scope of delivery 84 Assembly Instructions / Montageanleitung SIPLACE TX2i V1 SIPLACE TX2 V2 Option Mixed-Mode 01/2019 Fig.7: Gantry without vacuum hoses (using a SIPLACETX2iV1 as example) Gant…

2 Brief description

2.1 Product description

Assembly Instructions / Montageanleitung SIPLACE TX2i V1 SIPLACE TX2 V2 Option Mixed-Mode 01/2019 83

2 Brief description

NOTICE

Example shown as diagram

SIPLACE C&P20P heads are used in SIPLACE TX2i V1 machines.

SIPLACE C&P20P2 heads are used in SIPLACE TX2 V2 machines.

The mixed mode option is only possible for these two machine types.

► In the following descriptions, the SIPLACE TX2i V1 with a SIPLACE C&P20P head is

mainly used as example.

The procedure is the same for SIPLACE TX2 V2 machines and a C&P20P2 head.

Any relevant differences will be mentioned explicitly.

Fig.5: Head configurations (using the example of a

SIPLACETX2iV1)

This assembly instructions manual describes

the conversion of a SIPLACE TX2i V1 with

the head configurationCPP/CPP or

C&P20P/C&P20P to the head configura-

tionC&P20P/CPP or CPP/C&P20P.

2.1 Product description

It is also possible to operate both heads in Venturi mode or the SIPLACE C&P20x in vacuum mode

and the SIPLACE CPP in Venturi mode.

Fig.6: Gantry with vacuum hoses (using a SIPLACETX2iV1

as example)

Gantry with vacuum hoses for SIPLACE

C&P20x head (1).

 NOTICE!

If a head/gantry is to be operated with

vacuum in mixed mode and the

machine is not yet equipped with a

vacuum pump, this gantry must be ret-

rofitted accordingly.

Also read the assembly instructions

"Vacuum pump SIPLACE TX V1/V2-

Series" [00198147‑xx].

2 Brief description

2.2 Scope of delivery

84 Assembly Instructions / Montageanleitung SIPLACE TX2i V1 SIPLACE TX2 V2 Option Mixed-Mode 01/2019

Fig.7: Gantry without vacuum hoses (using a

SIPLACETX2iV1 as example)

Gantry without vacuum hoses for SIPLACE

CPP head (1).

2.2 Scope of delivery

SIPLACE TX Mixed Heads Retrofit Kit [03157293-xx]

Quantity Designation Item no.

1 Mixed Heads Retrofit Kit COTi TX

Consists of:

03157106-xx

1 Mixed heads conversion kit, holder for reject bin 03157117-xx

1 Mixed heads conversion kit, NC holder left 03157113-xx

1 Mixed heads conversion kit, NC holder right 03157116-xx

2 DIN EN ISO 8734 Master part 03015769-xx

1 Mixed Heads Retrofit Kit Pneumatics

Consists of:

03157292-xx

6 Blanking plug QSC-6H 00337891-xx

2 Y connector QSY-10-6 03068046-xx

0.52 m Plastic hose PUN-10x1.5 BL 00324466-xx

1 Push-in connector QS-6 03049770-xx

1 Cable ties B = 3.6mm L = 140mm TY 24M 00805141-xx

1 Grip cap GPN 210 ZL 19 × 20 03210738-xx

Fig.8: Mixed heads conversion kit COT-i TX

[03157106‑xx]

Fig.9: Mixed Heads Conversion Kit Pneumatics (incl.

grip cap) [03157292 xx] (without cable ties)

2 Brief description

2.2 Scope of delivery

Assembly Instructions / Montageanleitung SIPLACE TX2i V1 SIPLACE TX2 V2 Option Mixed-Mode 01/2019 85

Ordering the vacuum control valve:

Fig.10: Vacuum control valve assembly TX

[03162136‑xx]

The installation of the vacuum control valve is re-

quired, if only one SIPLACE C&P20x head is op-

erated with a vacuum pump. If the machine was

previously operated with a vacuum pump and two

SIPLACE C&P20x heads , this vacuum control

valve was not fitted and must be installed for the

mixed mode function.

Quant-

ity

Designation Item no.

1 Vacuum control valve assembly TX

Consists of:

03162136-xx

1 Vacuum control valve Becker ST 613-0-2 03109300-xx

1 T-piece 3/4" – 1” 03162231-xx

1 Double nipple 3/4" 03038435-xx

1 Thread sealant Loctite 55 03092492-xx

Additionally required parts:

●

Upgrade kit 2 pneumatics [03162637‑xx]

Fig.11: Upgrade kit 2 pneumatics [03162637‑xx]

If the mixed heads option is installed and a

vacuum pump is present, the following upgrade

kit is needed in addition:

If the mixed heads option is installed and no

vacuum pump is present, this upgrade kit is

already installed in the machine.

●

Upgrade kit vacuum pump TX V2 [03162656Sxx]

Fig.12: Upgrade kit vacuum pump TX V2 [03162656Sxx]

This upgrade kit is required if a vacuum pump is

not available yet but will be installed later on.