ReleaseNote_ALL_for_V30VGOSALL.pdf - 第127页

YAMAHAMOTORCO.,LTD. YAMAHAMOTORCO.,LTD. YAMAHAMOTORCO.,LTD. YAMAHAMOTORCO.,LTD. IMOperations IMOperations IMOperations IMOperations ReleaseNote(English) 2011/2/1 Ver Ver Ver Ver Rev Rev Rev Rev N um Num Num …

100%1 / 151
YAMAHAMOTORCO.,LTD.
YAMAHAMOTORCO.,LTD.YAMAHAMOTORCO.,LTD.
YAMAHAMOTORCO.,LTD.
IMOperations
IMOperationsIMOperations
IMOperations
ReleaseNote(English) 2011/2/1
Ver
VerVer
Ver Rev
RevRev
Rev Num
NumNum
Num Ref
RefRef
Ref Item
ItemItem
Item Type
TypeType
Type Keyword
KeywordKeyword
Keyword Contents
ContentsContents
Contents Result
ResultResult
Result Doc
DocDoc
Doc
3.21 1.000 TT4807
TT4807TT4807
TT4807 14
1414
14 Bug AllMachine Operator
Whenthefollowingprocedureswereexecuted,therewasabugthatanoperatorlevel
couldn’tbechanged.
1.Startauto-running.
2.Tap[Operator]andselectanyoperator.
3.Theoperatorlevelcouldn’tbechangedbecause[OK]buttonisgrayedout.
Itisfixed.
3.21 1.000 TT5000
TT5000TT5000
TT5000 15
1515
15 Bug Mounter Tray
Whenallofthefollowingconditionwassatisfied,therewasabugthatthemachine
becamesleep.
1.[Board]-[Board]-[RetrySequence]-[Block]is“Block”.
2.[Parts]-[Option]-[Parts.GroupNo.]offeederpartsisset.
3.WhenpartsispickedfromATS,blockretryisexecuted.
4.Atthetimeoftheblockretry,thepreceding2and3partsarepickedinthesame
group.
Itisfixed.
3.21 1.000 TT4998
TT4998TT4998
TT4998 16
1616
16 Bug Mounter History
Whenasplicingknotisdetected,therewasabugthat[Unitlog]-[FeederID]-[No
PartsErrorCounter]wasnotcounted.
Itisfixed.
3.21 1.000 TT4999
TT4999TT4999
TT4999 17
1717
17 Bug Mounter History
Whenallofthefollowingconditionweresatisfied,therewasabugthat"Currentdata"
wasnotaddedto"Recentdata"whenthehistorywasoutput.
1.On[Setup]–[SoftwareSetting]–[History],
1)Anypathisenteredin[Unitlogsetting]–[Parts]–[ServerPath].
2)[History]–[Thehistoryisoutputatspecifiedtime]is“chekedstate”.
Itisfixed.
3.21 1.000 TT5202
TT5202TT5202
TT5202 18
1818
18 Bug YG12Series Optimization
Whenoptimizationwasexecuted,unnecessary[Ea17735:ReelLayoutError]might
occur.
*Inordertoavoidthiserror,input"752.00"(designvalue)to[ReelHolderWidth]whose
[Setting]-[SpecificationInformation]-[PlateSpecification]-[SetNo.]is"1".
Thisproblemcausedbyincorrectsettingthatreelholderwidthnotedaboveissetto
"0"atthetimeofnewinstallation.
Itisfixed.
3.21 1.000 TT5279
TT5279TT5279
TT5279 19
1919
19 Bug
YS24(X)SL/
DL
Unit
Altoughthesettingoftheconveyordirectionwas[L->R],therewasabugthatthe
imageofthefollowingbuttonwas[R->L].
1.[Unit]-[Conveyor]-[ConveyIn]button
2.[Unit]-[Conveyor]-[ConveyOut]button
Itisfixed.
3.21 1.000 TT5210
TT5210TT5210
TT5210 20
2020
20 Bug YS24Series Teach
Whenallofthefollowingconditionsweresatisfied,therewasabugthatincorrectvalue
wasinputtomountingcoordinatesbyteaching.
1.[Machine]–[InstallationSetting]–[BaseMACS]is"Use".
2.Fiducialalignmentisenabledinaselectedboarddata.
3.[Teach]–[Setting]–[FiducialCorrection]issetto"checkedstate".
Itisfixed.
3.21 1.000 TT5293
TT5293TT5293
TT5293 21
2121
21 Bug
YS24X
Series
Tray
Whenallofthefollowingconditionsweresatisfied,therewasacasethat[Ea29011:
WARNINGPICKPOSITIONFORTRAY]occurredbymistakeatthetimeofdatacheck.
1.Traypartsisused.
2.Traypartsarearrangedatveryclosetothelimitofthepaletteinnercircumference
thatcanbepicked.
Itisfixed.
3.21 1.000 TT5068
TT5068TT5068
TT5068 22
2222
22 Bug
YS24XSL/D
L
Teach
Whenanythefollowingprocedurewereexecutedtherewasabugthat[Es00013:2nd
LIMITOVER]occurredcontinuouslyinspiteofclosingit
1.Movetheaxisoutofthesoftlimit.
2.SelectATSpartsandtap[Parts]-[Tray]-[PitchTch]-[MovePitch].
3.[Es00013]occurs.(Itoccurscontinuouslyuntiltheaxisismovedoutofthesoft
limit.)
Itisfixed.
3.21 1.000 TT5116
TT5116TT5116
TT5116 23
2323
23 Bug
YSSeries
Mounter
System
Backup
Whenthefollowingprocedurewasexecuted,therewasabugthatthe"Mounter
applicationabnormalend"occurred.
1.On[Setup]-[SoftwareSetting]-[Basic]-[SystemBackup],
1)[Fixafolder]is“chekedstate”.
2)Thenumericalvalueisseton[FolderName].
Itisfixed.
3.21 1.000 TT5313
TT5313TT5313
TT5313 24
2424
24 Bug
YSSeries
Mounter
Database
Whenthefollowingprocedureswereexecuted,therewasabugthatthe"Mounter
Applicationabnormalend"occurred.
1.[Setup]–[Database]–[Thetimingtosetfromdatabaseall(partsandmark)]is
“AfterBoardReadingAndAutoRunStarting”or“AfterBoardReadingOnly”.
2.Thereisaparts(mark)informationwhichisthetargettobesetfromthedatabase.
3.Thisinformationisdifferentfromthatinthedatabase.
4.Tap[Setup]–[Board]–[Select]button.
Itisfixed.
3.21 1.000 TT5313
TT5313TT5313
TT5313 25
2525
25 Bug
YSSeries
Mounter
Database
Whenthefollowingprocedureswereexecuted,therewasabugthatthe"Mounter
Applicationabnormalend"occurred.
1.[Setup]–[Database]–[Thetimingtosetfromdatabaseall(partsandmark)]is“After
BoardReadingAndAutoRunStarting”.
2.Therewasaparts(mark)informationwhichisthetargettobesetfromthedatabase.
3.Thisinformationisdifferentfromthatinthedatabase.
4.Startauto-running.
Itisfixed.
MDOC-VG30-00001 126/151
YAMAHAMOTORCO.,LTD.
YAMAHAMOTORCO.,LTD.YAMAHAMOTORCO.,LTD.
YAMAHAMOTORCO.,LTD.
IMOperations
IMOperationsIMOperations
IMOperations
ReleaseNote(English) 2011/2/1
Ver
VerVer
Ver Rev
RevRev
Rev Num
NumNum
Num Ref
RefRef
Ref Item
ItemItem
Item Type
TypeType
Type Keyword
KeywordKeyword
Keyword Contents
ContentsContents
Contents Result
ResultResult
Result Doc
DocDoc
Doc
3.21 1.000 TT5058
TT5058TT5058
TT5058 26
2626
26 Bug
YSSeries
Mounter
ConveyorOut
Whenallofthefollowingconditionsweresatisfied,therewasabugthatthecarried-out
boardwasnotcarriedouttothedownstreammachine,andstoppedattheexitposition.
1.[VmSpec]–[InstallationSetting]–[StriedboardBuffering]is“Enable”.
2.[Ea31:PICKUPERROR]etc.occurswhiletheboardiscarriedoutfromthemachine
tothewaitingpositioninthedownstreammachine.
Itisfixed.
3.21 1.000 TT5152
TT5152TT5152
TT5152 27
2727
27 Bug
YSSeries
Mounter
ConveyorOut
TheUROUTsignalwasturnedoffthoughthecarried-outboardwascarried,
therewasabugthatthestateofthemachinewas"WAITSTOP".
Itisfixed.
3.21 1.000 TT5212
TT5212TT5212
TT5212 28
2828
28 Bug
YSSeries
Mounter
ConveyorOut
1.Theboardwascarriedto"boardfixingposition".
2.Whenthe"pickuperror"etcoccur,thestateofthemachinewaschangedto"WAIT
STOP".
Itisfixed.
3.21 1.000 TT5179
TT5179TT5179
TT5179 29
2929
29 Bug
YSSeries
Mounter,
YG12Series
Tray
Whentraypartsarrangedinazigzaglineareused,therewasabugthattraypartscould
notberefilledbecausethecheckboxon[Setup]-[TrayCnt]-[ATSSupp.]screen
wasnotdisplayed.
Itisfixed.
3.21 1.000 TT5112
TT5112TT5112
TT5112 30
3030
30 Bug Printer Cleaning
Therewerethefollowingbugswhencleaningfeedbackwasexecuted.
1.Theinspectionwasnotexecuted,although[Inspection]-[Inspection]-[AfterAuto
Cleaning]-[Inspection]was“Use”.
2.When“ControlledintheBoard”cleaningwasenabled,cleaningwasexecutedin
anotherwayoratanothertimingbymistakebecausethecleaningcounterwasnot
cleared.
Itisfixed.
3.21 1.000 TT4915
TT4915TT4915
TT4915 31
3131
31 Bug Printer History
Therewerethebugsin[MIS]asfollows.
1.Onthe[MIS]-[BoardLog]tab.
1)Thevalueof[DownstreamStandbyCT]wasaddedtothatof[TransferCT]by
mistake.
2)Thevalueof[BoardRemove]wasnotaddedevenifaboardistakenoutwhenthe
solder-printinspectionresultwasNG.
3)Thevalueof[UpstreamStandbyCT]wasaddedonlywhenaboardwasexistedon
theexitconveyor.
4)Thevalueof[FeedbackPrint]and[FeedbackCleaning]werenotadded.
2.Insteadofthemeanvalue,themaximumvaluewasdisplayedonthe[MIS]-[Program
Log]-[PrintCTAVE].
Itisfixed.
3.21 1.000 TT5061
TT5061TT5061
TT5061 32
3232
32 Bug Optimizer Feeder
Whenaboarddatawasoptimized,somefeedersmightbeassignedfromtheendsofthe
feederplatealthoughtherewasenoughnon-occupiedfeederspace.
Itisfixed.
3.21 1.000 TT5082
TT5082TT5082
TT5082 33
3333
33 Bug Optimizer Optimization
Whenanyofthefollowingconditionsweresatisfied,therewasabugthatanoptimized
boarddatawascreatedalthoughtheoptimizationfailed.
1.Loadingaboarddatafails.(Ex.[Ea663:FileError])
2.Nozzleinterferencecheckfails.(Ex.[Ea16159:Failureinpartsgroupnumbering])
Itisfixedthatan
optimizedboard
dataisnot
createdafterthe
optimizationfails.
3.21 1.000 TT5134
TT5134TT5134
TT5134 34
3434
34 Bug Optimizer Optimization
Whenallofthefollowingconditionsweresatisfied,therewasabugthatpallet
interferenceerror,[Ea17659:Thepalletsupplyingpartsinterfereswiththedumppallet.]
etc.,occurredalthoughtherewasno“RecoveryPallet”inthemachine.
1.[MachineProperty]-[MachineInformation]-[]InstallationSetting]-[Option]-
[RecoveryPallet]is“NONE”.
2.Thevalueof[MachineProperty]-[MachineData]-[TrayChanger]-[Position]-
[RecoveryPalletNumber]isbetweenthefollowings.
1)Thevalueof[Parts]–[Tray]–[PalletNo.Start]
2)Thevalueof[Parts]–[Tray]–[PalletNo.Last]
Itisfixed.
3.21 1.001 KHn312
KHn312KHn312
KHn312 1
11
1 CriticalBug
CriticalBugCriticalBug
CriticalBug AllMachine Servo
Whenanyofthefollowingconditionsweresatisfied,therewasabugthat[Es00025:
PHASELOSS]occurredbymistake.
1.Whileanyoftheaxesaremoving(e.g.duringwarmingup),[EMERGENCYSTOP]
buttonispressed.
2.Whileanyoftheaxesaremoving(e.g.duringwarmingup),[EsXXXXX:SERVO
ERROR]occurs.Especiallyatthefollowingaxes,itoccurredwithhighfrequency.
1)SCaxis(YS12,YG12,YS12P,YS24)
2)AZaxis(ThemachinewithsATS)
3)SZaxis(YSP)
4)DYandDZaxes(ThemachinewithdYTF)
Afterclearing[Es00025:PHASELOSS]andpressing[READY]button,if[Es00025]
appearsagain,thismeansthatphaselossisactuallydetected.Otherwise,itisafalse
detection,sopleaserestartthemachine.
Itisfixed.
3.22 1.000 TT5453
TT5453TT5453
TT5453 1
11
1 CriticalBug
CriticalBugCriticalBug
CriticalBug AllMachine
Application
exit
Therewasabugthatmightcausethemachineapplicationabnormalendwhenvarious
errorsoccurredoneafteranother.
Itisfixed.
3.22 1.000 TT5372
TT5372TT5372
TT5372 2
22
2 CriticalBug
CriticalBugCriticalBug
CriticalBug YS24(X)DL Editor
Whenthefollowingprocedureswereexecuted,therewasabugthatacombinedboard
datacannotbesaved.
1.ThemounterapplicationwhoseversionisV3.21STDR1.000orlaterisused.
2.Click[Editor].
3.Selectacombinedboarddataon[File]-[OpenBoardData].
4.Although[File]-[SaveBoardData]isselected,thecombinedboarddatacannotbe
saved.
Itisfixed.
MDOC-VG30-00001 127/151
YAMAHAMOTORCO.,LTD.
YAMAHAMOTORCO.,LTD.YAMAHAMOTORCO.,LTD.
YAMAHAMOTORCO.,LTD.
IMOperations
IMOperationsIMOperations
IMOperations
ReleaseNote(English) 2011/2/1
Ver
VerVer
Ver Rev
RevRev
Rev Num
NumNum
Num Ref
RefRef
Ref Item
ItemItem
Item Type
TypeType
Type Keyword
KeywordKeyword
Keyword Contents
ContentsContents
Contents Result
ResultResult
Result Doc
DocDoc
Doc
3.22 1.000 TT5374
TT5374TT5374
TT5374 3
33
3 CriticalBug
CriticalBugCriticalBug
CriticalBug YS24(X)DL Editor
Whenthefollowingprocedureswereexecuted,therewasabugthatacombinedboard
datawassavedwithouttheoverwriteconfirmation.
1.ThemounterapplicationwhoseversionisV3.21STDR1.000orlaterisused.
2.Click[Editor].
3.Loadacombinedboarddatafrom[File]-[OpenBoardDatainthisEditor].
4.On[Boarddatasave]window,select[SaveBoardDataAs...],theninputthe
combinedboardnamewhichalreadyexists.
5.Click[Save]button.
Itisfixedsothat
[Ea12046:FILE
OVERWRITE]will
bedisplayed.
3.22 1.000 TT5400
TT5400TT5400
TT5400 4
44
4 CriticalBug
CriticalBugCriticalBug
CriticalBug YS24(X)DL Optimization
Whenallofthefollowingconditionsweresatisfied,therewasabugthatoptimization
succeededbymistakealthoughitshouldfailand[Ea131:BOARDDATAERROR]should
occur.Thisbugmightcausemismountingbyusingtheboarddata.
1.YS24(X)DLexistsintheline.
2.Boarddataformatis"YGX(Combined)".
3.Thereisapartsdatawhichisin[Board]-[Mount]-[P.No.]butisnotused.
Itisfixed.
3.22 1.000 TT5387
TT5387TT5387
TT5387 5
55
5 CriticalBug
CriticalBugCriticalBug
CriticalBug YS24(X)DL CycleStop
Whenthefollowingprocedureswereexecuted,therewasabugthataboardcarriedout
withoutcompletingthemounting.
1.Conditions
1)[Board]-[MountMode]is"EachLanes".
2)[Setup]-[CycleStop]is"ON".
2.Procedures
1)Whenboardsexistinbothconveyorlanes,tap[CycleStop]button.
2)Press[RESET]button.
3)Restartauto-running.
Itisfixed.
3.22 1.000
TT5267
TT5267TT5267
TT5267
TT5376
TT5376TT5376
TT5376
TT5433
TT5433TT5433
TT5433
6
66
6 CriticalBug
CriticalBugCriticalBug
CriticalBug Printer Auto-running
Whenthefollowingprocedureswereexecuted,theprintermightoccasionallybecome
sleep.
1.Press[EMERGENCYSTOP]buttonduringauto-running.
2.Press[RUN]buttonontheoperationpanel.
Itisfixed.
3.22 1.000 TT5104
TT5104TT5104
TT5104 7
77
7 CriticalBug
CriticalBugCriticalBug
CriticalBug Printer Auto-running
Whenthefollowinginterlockerrorsoccurred,forexample,theprinterapplicationmight
becomesleep.
1.[Ea8050:FLAPUPINTERLOCK]
2.[Ea8055:CLEANERFREEINTERLOCK]
3.[Ea8059:UNABLETOMOVEAXISWITHABOARDONTHECONVEYOR]
Theotherinterlockerrorsarethesame.
Itisfixed.
3.22 1.000 TM2284
TM2284TM2284
TM2284 8
88
8 Add Mounter Feeder
ThefollowingFeedertypeshavebeensupported.
1.88mmTape
2.104mmTape
3.120mmTape
4.136mmTape
5.152mmTape
6.168mmTape
7.184mmTape
8.200mmTape
Itismodified.
3.22 1.000 TM2413
TM2413TM2413
TM2413 9
99
9 Add Printer Boarddata
When[Print]-[Basics]-[MaskSize]is"750[mm]*650[mm]"inaboarddata,the
maximumvalueof[BoardSizeY(mm)]hasbeenchangedasfollows.
Beforethechange:250mm
Afterthechange:330mm
Itismodified.
3.22 1.000 TP1901
TP1901TP1901
TP1901 10
1010
10 Add Optimizer Fixedboard
Ithasbeenmodifiedsothattheoptimizercancreatetheresultthatisbetterfor
parallellanesmountingwhenitisexecutedwithparallellanesmountingandwiththe
settingwhichusefixedboardin[Setoptimizationparameter]–[Detail].
Itismodified.
3.22 1.000 TT5296
TT5296TT5296
TT5296 11
1111
11 Change AllMachine GUI
When"FileFormat"or"Lanenumber"on[Setup]-[BoardExplorer]ischanged,ithas
beenchangedsothatthefileformatandthelanenumberonthefollowingscreenwon't
changedependingonit.
1.[Setup]-[Board]
2.[Save]
Therefore,itisabletoselectorsaveanintendedboarddata.
Itismodified.
3.22 1.000 TP1740
TP1740TP1740
TP1740 12
1212
12 Change Mounter GUI
Theusageof[ServerPath:]on[Setup]-[SoftwareSetting]-[Network]-[Network
setting]hasbeenchangedasbelow.
Before:boarddata,POSinformation,RetryinformationandHistory
After:boarddatalocation
Therefore,the[Network]buttonsonthefollowingscreensweredeleted.
WhenyouchoseafolderintheNetwork,selectitfrom[Folder]button.
1.[Parts]-[PartsAdj]-[RandomBall]-[ReadPOS]
2.[MIS]-[SaveLog]
3.[Unitlog]-[SaveLog]
4.[Monitor]-[Retry]-[Save]
Itismodified.
MDOC-VG30-00001 128/151