OM-1076-001.pdf - 第168页
3.1.3 Deform (Simple) Components Measure the dimensions (*1 through *19) in the figures. (a) (1), (2), (3), and (4) in the figure correspond relatively to "Corner 1", "Corner 2", "Corner 3",…
3.1.2 Square Components
Measure the dimensions (*1 through *12) in the figures.
(1), (2), (3), and (4) in the figure correspond relatively to "Corner 1", "Cor-
ner 2", "Corner 3", and "Corner 4" in the corner data.
Individual Data Sheet (Square)
Minimum Unit: 0.01 mm
*1 Mold Size X (Horizontal)
*2 Mold Size Y (Vertical)
*3 Mold Size t (Thickness) [T (Thickness)]
*4 Corner 1 Dim X
*5 Corner 1 Dim Y
*6 Corner 2 Dim X
*7 Corner 2 Dim Y
*8 Corner 3 Dim X
*9 Corner 3 Dim Y
*10 Corner 4 Dim X
*11 Corner 4 Dim Y
*12 Elctd Size
3.1 Leadless Components
0107-001 4-10 Tg0502-PM-CL
Fig. D21
3.1.3 Deform (Simple) Components
Measure the dimensions (*1 through *19) in the figures.
(a) (1), (2), (3), and (4) in the figure correspond relatively to "Corner 1",
"Corner 2", "Corner 3", and "Corner 4" in the corner data.
(b) The center of the
mark indicates the center of the mold.
(a) (1), (2), (3), and (4) in the figure correspond relatively to "Corner 1",
"Corner 2", "Corner 3", and "Corner 4" in the corner data.
(b) The center of the
mark indicates the center of the mold.
0107-001 4-11 Tg0502-PM-CL
3.1 Leadless Components
Fig. D22
Fig. D23
3.1 Leadless Components
0107-001 4-12 Tg0502-PM-CL
Individual Data Sheet (Deform: Simple Shape)
Minimum Unit: 0.01 mm
*1 Mold Size X (Horizontal)
*2 Mold Size Y (Vertical)
*3 Mold Size t (Thickness) [T (Thickness)]
*4 Outward Length 1
*5 Outward Length 2
*6 Outward Length 3
*7 Outward Length 4
*8 Corner 1 Dim X
*9 Corner 1 Dim Y
*10 Corner 2 Dim X
*11 Corner 2 Dim Y
*12 Corner 3 Dim X
*13 Corner 3 Dim Y
*14 Corner 4 Dim X
*15 Corner 4 Dim Y
*16 Edge Data 1 Detection Posn X
*17 Edge Data 1 Detection Posn Y
*18 Edge Data 2 Detection Posn X
*19 Edge Data 2 Detection Posn Y