OM-1076-001.pdf - 第171页
0206-002 4-14 Tg0502-PM-CL 3.2 Area Array Components Minimum Unit: 0.001 mm *1 Mold size X [mm] *2 Mold size Y [mm] *3 Mold size t [mm] (thickness) [T [mm] (thickness)] *4 Elctd T ype #1 Dim 1 [mm] *5 Grp Posn X [mm] of …
0206-002 4-13 Tg0502-PM-CL
3.2 Area Array Components
Fig. D24
3.2 Area Array Components
3.2.1 BGA/CSP Components
Measure the dimensions (*1 through *10) in the figure below.
When a component has several electrode groups, set "Enable" in the
"Extended setting" text box and measure the dimensions (*5 through
*10) for Electrode Groups 2 through 6.
As for components with missing electrodes, set "Enable" in the "Ex-
tended setting" text box and the number of missing blocks in the "# of
Missing Electrodes" text box. After that, measure the dimensions (*11
through *14) in the figure.
When there are several missing blocks, measure the dimensions (*11
through *14) for Missing Electrodes 2, 3, and so on.
(Up to 40 blocks can be specified as electrode-missing blocks.)
(a) The figure shows the top view (no ball side) of the component and is
an example of "# of Electrode Groups = 1".
(b) The center of the mark is the reference point of the component.
(In normal cases, the reference point is located at the center of the
mold.)
0206-002 4-14 Tg0502-PM-CL
3.2 Area Array Components
Minimum Unit: 0.001 mm
*1 Mold size X [mm]
*2 Mold size Y [mm]
*3 Mold size t [mm] (thickness) [T [mm] (thickness)]
*4 Elctd Type #1 Dim 1 [mm]
*5 Grp Posn X [mm] of Grp No. 1
*6 Grp Posn Y [mm] of Grp No. 1
*7 Row Pitch [mm] of Grp No. 1
*8 Col Pitch [mm] of Grp No. 1
*9 # Of Rows [pcs.] of Grp No. 1
*10 # Of Cols [pcs.] of Grp No. 1
*11 Missing Stg Row of Elctd Grp No. 1
*12 Missing Stg Col of Elctd Grp No. 1
*13 # Of Missing Rows [pcs.] of Elctd Grp No. 1
*14 # Of Missing Cols [pcs.] of Elctd Grp No. 1
Fig. D25
Individual Data Sheet (BGA/CSP)
The figure shows the top view (no electrode side) of the component.
Section 5
Component Library Data Sheets
0107-001 5-A Tg0502-PM-CL
This section describes the data sheets to be filled in with the
measured dimensions of a component, etc.
Frame Lines of Sheets
: To be filled with standard data
: To be filled with extended data