OM-1076-001.pdf - 第97页
B01 Shape Data (B01_10) 0107-001 2-71 Tg0502-PM-CL Fig. B148 Posn (Long) Det [mm] + 04.105 Lead No. 1 Fig. B149 (6) Lead Group Posn (Long) Det [mm] Set the distance between the edges of the mold and the lead (elec- trode…
B01 Shape Data (B01_10)
0107-001 2-70 Tg0502-PM-CL
Fig. B146
Posn (Latl) Det [mm]
+00.000
Lead
No.
1
Fig. B147
(5) Lead Group Posn (Latl) Det [mm]
Set the distance between the center lines of the mold and a lead group.
"+" and "−" signs must be used as shown in the figure below.
The center of the
mark indicates the center of the mold.
Top View of Component
Unit: mm
Data Input Range: −99.999 to +99.999
Set this only when "Enable" is selected in the "Extended Setting" text box.
Applicable Components : IC (Simple), Connector (Simple), and
Other Leaded (Simple)
B01 Shape Data (B01_10)
0107-001 2-71 Tg0502-PM-CL
Fig. B148
Posn (Long) Det [mm]
+04.105
Lead
No.
1
Fig. B149
(6) Lead Group Posn (Long) Det [mm]
Set the distance between the edges of the mold and the lead (elec-
trode).
Unit: mm
Data Input Range: -99.999 to 99.999
Applicable Components: IC (Simple), Connector (Simple), and
Other Leaded (Simple)
(a) To set a parameter in the "Posn (Long) Det" text box, select "Enable"
in the "Extended Setting" text box.
(b) Set a parameter only when "Leadless" is selected in the "Type" text
box for ICs.
A parameter must be set when "Electd" is selected in the "Type" text
box for connectors or other leaded components.
(c) A minus (−) value must be set when the edge of the lead (electrode)
is located inside the edge of the mold.
A plus (+) value must be set when the edge of the lead (electrode) is
protruding from the edge of the mold.
(7) Lead Group Missing Lead Start
Set the number of leads including the first missing lead.
The center of the
mark is the reference position for outward length
setting.
Top View of Component
Table B17
Lead Group Data 1 2
Missing Lead Start 4 2
Unit: piece
Data Input Range: 1 to 255
Set this only when "Enable" is selected in the "Extended Setting" text box.
Applicable Components : IC (Simple), IC (Complex), Connector
(Simple), Connector (Complex), Other
Leaded (Simple), and Other Leaded
(Complex)
0111-002 2-72 Tg0502-PM-CL
B01 Shape Data (B01_10)
Fig. B150
Missing Lead Start
001
Lead
No.
1
Fig. B151