4OM-1626-001_w.pdf - 第112页
4OM-1610 2-9 3. Machine Information : Chap.2 Management Information Code Display Area A (The outline of the Management Information) Display Area B (The details of the Management Information) 017501 Operation mode set con…
4OM-1610
2-8
2. Management Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
015201 Teaching check the conveyor
No P.C.B. on Conveyor. Please put P.C.B. in.
015202 Teaching check the conveyor
Please set P.C.B. positioning. Please set it again after cancel positioning if P.C.B.
positioning is already done.
015203 Teaching check the conveyor
016001 Tray teaching
Traverse of Tray is not drawn out (Rear). Draw out Traverse.
016002 Tray teaching
Tray Traverse is not drawn out (Front). Draw out Traverse.
016101 Coplanarity Teaching
"Coplanarity Detection" of Test Operation Mode is set "No". Execute it after
cancelling Test Operation Mode.
016201 Coplanarity Test
Please pickup part.
017009 Teaching Check on the position of Glass jig
Necessary Glass Jig for Teaching does not exist. Please check that Glass Jig is
set in its position.
017201 Nozzle set-up(Rear)
Nozzle Pickup/Store mode of Stocker(Front) is not possible to operate. Please set
Stocker(Rear).
017202 Nozzle set-up(Rear)
High nozzle cannot be stored while Odd nozzle is placed. Please restart after
returning all Odd Nozzle.
017203 Nozzle set-up(Rear)
High nozzle cannot be stored while Odd nozzle is placed. Please restart after
returning all Odd Nozzle.
017204 Nozzle set-up(Rear)
Because of interference with Nozzle which is already placed, it cannot be placed.
Do not place Nozzle in the front and rear of two Odd nozzle placed.
017301 Nozzle set-up(Front)
Nozzle Pickup/Store mode of Stocker(Rear) is not possible. Please set
Stocker(Front).
017302 Nozzle set-up(Front)
High nozzle cannot be stored while Odd nozzle is placed. Please restart after
returning all Odd Nozzle.
017303 Nozzle set-up(Front)
High nozzle cannot be stored while Odd nozzle is placed. Please restart after
returning all Odd Nozzle.
017304 Nozzle set-up(Front)
Because of interference with Nozzle which is already placed, it cannot be placed.
Do not place Nozzle in the front and rear of two Odd nozzle placed.
017401 Button for inserting power
Can not supply power while Line Sensor program is on writing. Operate it after
writing completely.
0911-001
4OM-1610
2-9
3. Machine Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
017501 Operation mode set conrmation
"Feeder Connection" or "Feeder Serial Communication" of Test Operation Mode is
set. Execute it after reset Operation Mode.
017601 Inching movement
Perform zeroing.
017602 Inching movement
Please push the Feeder Base Ready SW
017603 Inching movement
Close the safety cover of multi-tray, and press the Ready button).
017604 Inching movement
The range is out of movable Range.
017605 Inching movement
HL-axis is fallen. There is a possibility of collision between Noz and axis. Please
perform zeroing of HL-axis or move it to origin position.
017606 Inching movement
L1-axis is fallen. There is a possibility of collision between Noz and axis. Please
perform zeroing of L1-axis or move it to origin position.
017607 Inching movement
L2-axis is fallen. There is a possibility of collision between Noz and axis. Please
perform zeroing of L2-axis or move it to origin position.
017608 Inching movement
L3-axis is fallen. There is a possibility of collision between Noz and axis. Please
perform zeroing of L3-axis or move it to origin position.
017701 Zeroing(set axis)
Ready for Feeder Base Press SW
017702 Zeroing(set axis)
Close the safety cover of multi-tray, and press the Ready button).
018001 Recycling Conveyor (rear)
The recycle conveyor (rear) is lled up.
018002 Recycling Conveyor (rear)
The connection of Recycle conveyor(Rear) differs from Component Data. Or multi-
connection.
018101 Recycling Conveyor (front)
The recycle conveyor (front) is lled up.
018102 Recycling Conveyor (front)
The connection of Recycle conveyor(Front) differs from Component Data. Or
multi-connection.
018201 Multi-tray (Rear)
Close the safety cover of multi-tray, and press the Ready button.
018202 Multi-tray (Rear)
Pallet of multi-tray is drawn out. Execute zeroing all, store the pallet.
018203 Multi-tray (Rear)
Multi-tray breaking out was detected. Execute zeroing all, store the pallet.
018204 Multi-tray (Rear)
Press [READY] button of Feeder base, and supply the power for Multi Tray.
0911-001
4OM-1610
2-10
3. Machine Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
018205 Multi-tray (Rear)
Close the safety cover(Center) of multi-tray, and press [READY] button.
018206 Multi-tray (Rear)
Close the safety cover(Lower) of multi-tray, and press [READY] button.
018207 Multi-tray (Rear)
Close the safety cover(Upper) of multi-tray, and press [READY] button.
018208 Multi-tray (Rear)
Zeroing of Traverse-axis is not nished. Perform zeroing of multi-tray.
018209 Multi-tray (Rear)
Zeroing of Elevator1-axis is not nished. Perform zeroing of multi-tray.
01820a Multi-tray (Rear)
Zeroing of Elevator2-axis is not nished. Perform zeroing of multi-tray.
01820b Multi-tray (Rear)
Pickup miss cmpnt(8mm) is detected.[B15417]
01820c Multi-tray (Rear)
Pickup miss cmpnt(14mm) is detected.[B15418]
01820d Multi-tray (Rear)
Pickup miss cmpnt(28mm) is detected.[B15419]
01820e Multi-tray (Rear)
Pallet Chuck claw is open.
01820f Multi-tray (Rear)
Pallet Flying away is detected.
018210 Multi-tray (Rear)
Magazine1 (Lower) Shutter on Traverse side is open.
018211 Multi-tray (Rear)
Magazine2(Upper) Shutter on Traverse side is open.
018212 Multi-tray (Rear)
Access detecting Sensor (Right) : Cannot detect Elevator Unit
018213 Multi-tray (Rear)
Access detecting Sensor (Left) : Cannot detect Elevator Unit
018301 Multi-tray (Front)
Close the safety cover of multi-tray, and press the Ready button).
018302 Multi-tray (Front)
Pallet of multi-tray is drawn out. Execute zeroing all, store the pallet.
018303 Multi-tray (Front)
Multi-tray breaking out was detected. Execute zeroing all, store the pallet.
018304 Multi-tray (Front)
Press [READY] button of Feeder base, and supply the power for Multi Tray.
018305 Multi-tray (Front)
Close the safety cover (Center) of multi-tray, and press [READY] button.
018306 Multi-tray (Front)
Close the safety cover (Lower) of multi-tray, and press [READY] button.
018307 Multi-tray (Front)
Close the safety cover (Upper) of multi-tray, and press [READY] button.
018308 Multi-tray (Front)
Zeroing of Traverse-axis is not nished. Perform zeroing of multi-tray.
0911-001