4OM-1626-001_w.pdf - 第138页
4OM-1610 3-7 3. Error IDs and Remedial Procedures : Chap.3 091 1-001 Error ID Error Name, Description, Cause, and Remedy 400432 Interlock Error T ripped circuit breaker of motor (Rear). Please turn on again after turning…
4OM-1610
3-6
3. Error IDs and Remedial Procedures : Chap.3
0911-001
Error ID Error Name, Description, Cause, and Remedy
400425 Interlock Error
Emergency stop (Rear) detected
Drive after the power turns on.
400426 Interlock Error
Safety door (lower) of tray feeder unit opened.(Rear)[S0501]
Close the safety door(Lower) and operate it.
400427 Interlock Error
Safety door (upper) of tray feeder unit opened.(Rear)[S0502]
Close the safety door(Center) and operate it.
400428 Interlock Error
Safety door (center) of tray feeder unit opened.(Rear)[S0503]
Close the safety door(Upper) and operate it.
400429 Interlock Error
Chucking lever of pallet opened while elevator is moving.(Rear)[B15407, B15408]
Check out B15407, B15408, detection Sensor of closing Chucking lever of pallet.
40042a Interlock Error
Break out the pallet while elevator is moving.(Rear)[B15406]
Check out B15406(detecttion sensor of breaking out Pallet) and position of Pallet.
40042b Interlock Error
Detect pickup miss components on the pallet. (Rear)[B15417]
Please open the main cover and remove pickup miss components on the pallet.
40042c Interlock Error
Detect pickup miss components on the pallet. (Rear)[B15418]
Please open the main cover and remove the pickup miss components on tray
pallet.
40042d Interlock Error
Detect pickup miss components on the pallet. (Rear)[B15419]
Please open the main cover and remove the pickup miss components on tray
pallet.
40042e Interlock Error
Open the rack shutter while lower elevator is moving.(Rear)[B15521][B15523][B1
5525]
Check out B15521, B15523, B15525(the sensor of closing magazine rack
shutter).
40042f Interlock Error
Open the rack shutter while upper elevator is moving.(Rear)[B15527][B15529][B1
5531]
Check out B15527, B15529, B15531(the sensor of closing magazine rack
shutter).
400430 Interlock Error
Lower magazine positioning error.(Rear) [B15526]
Check Magazine Rack.
400431 Interlock Error
Upper magazine positioning error.(Rear) [B15532]
Check Magazine Clamp.
4OM-1610
3-7
3. Error IDs and Remedial Procedures : Chap.3
0911-001
Error ID Error Name, Description, Cause, and Remedy
400432 Interlock Error
Tripped circuit breaker of motor (Rear).
Please turn on again after turning off and cancelling Trip mode.
400433 Interlock Error
Cut off safety relay of lower elevator (Rear).
Check main circuit and safety door.
400434 Interlock Error
Cut off safety relay of upper elevator (Rear).
Check the main circuit and safety door.
400435 Interlock Error
Released clamp of elevator unit (Rear)[B15426, B15428]
Check out B15426, B15428(Elevator unit clamp sensor)
400436 Interlock Error
Detect pickup miss components (Rear) [B15412]
1.Open the cover.
2.Conrm suppressor, Disengaged Latch and remove the devices.
3.Close the cover and Lock it.
400437 Interlock Error
Released Feeder Hook was detected(Rear)[B15412]
1.Open the cover.
2.Conrm suppressor, Disengaged Latch and remove the devices.
3.Close the cover and Lock it.
400438 Interlock Error
Emergency stop (Front) was detected
Please turn on the main body and operate it.
400439 Interlock Error
Safety door(Lower) of tray feeder unit opened.(Front)[S0501]
Please close the safety door(lower) and operate it.
40043a Interlock Error
Safety door(Upper) of tray feeder unit opened.(Front)[S0502]
Please close the safety door(upper) and operate it.
40043b Interlock Error
Safety door(Center) of tray feeder unit opened.(Front)[S0503]
Please close the safety door(center) and operate it.
40043c Interlock Error
Pallet Chuck Claw opened while elevator is moving.(Front)[B15407, B15408]
Check out B15407, B15408(detection Sensor of closing Chucking lever of pallet).
40043d Interlock Error
Pallet jutted out during elevator moving.(Front)[B15406]
Check out B15406(detecttion sensor of breaking out Pallet) and position of Pallet.
40043e Interlock Error
Pickup miss components on the Pallet was detected.(Front) [B15417]
Open the main cover and remove pickup miss components on the Tray Pallet.
40043f Interlock Error
Pickup miss components on the Pallet was detected.(Front) [B15418]
Open the main cover and remove pickup miss components on the Tray Pallet.
4OM-1610
3-8
3. Error IDs and Remedial Procedures : Chap.3
0911-001
Error ID Error Name, Description, Cause, and Remedy
400440 Interlock Error
Pickup miss components on the Pallet was detected.(Front) [B15419]
Open the main cover and remove pickup miss components on the Tray Pallet.
400441 Interlock Error
the rack shutter opening was detected during lower elevator
moving.(Front)[B15521, B15523,B15525]
Check out B15521, B15523, B15525(the sensor of closing magazine rack
shutter).
400442 Interlock Error
the rack shutter opening was detected during upper elevator
moving.(Front)[B15527, B15529,B15531]
Check out B15527, B15529, B15531(the sensor of closing magazine rack
shutter).
400443 Interlock Error
Lower magazine positioning error.(Front)[B15526]
Conrm Magazine clamp.
400444 Interlock Error
Upper magazine positioning error.(Front)[B15532]
Conrm Magazine Clamp.
400445 Interlock Error
Tripped circuit breaker of motor (Front)
Please turn on again after turning off and cancelling Trip mode.
400446 Interlock Error
Cut off safety relay of lower elevator (Front).
Conrm the main circuit and safety door.
400447 Interlock Error
Cut off safety relay of upper elevator (Front).
Conrm the main circuit and safety door.
400448 Interlock Error
Released clamp of elevator unit (Front)[B15426, B15428]
Conrm the Elevator Unit Clamp Sensor(B15426, B15428)
400449 Interlock Error
Pickup miss components was detected(Front). [B15412]
1.Open the cover.
2.Conrm suppressor, Disengaged Latch and remove the devices.
3.Close the cover and Lock it.
40044a Interlock Error
Released Feeder Hook was detected [B15412]
1.Open the cover.
2.Conrm suppressor, Disengaged Latch and remove the devices.
3.Close the cover and Lock it.
400460 Interlock Error
Invalid head(Rear) nozzle downward detect
Please perform a zeroing.
400461 Interlock Error
Invalid head(Front) nozzle downward detect
Please perform a zeroing.