4OM-1626-001_w.pdf - 第149页
4OM-1610 3-18 3. Error IDs and Remedial Procedures : Chap.3 Error ID Error Name, Description, Cause, and Remedy 400d02 Software Interlock Error Head (Rear) NL axis's poor operation was detected, and the scram of the…
4OM-1610
3-17
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
400961 Servo Alarm
Sensor Error
Check Motor Encoder wires. Or, exchange the motor.
400962 Servo Alarm
Sensor Error
Check Motor Encoder wires. Or, exchange the motor.
400971 Servo Alarm
high drive Voltage
Insufcient power. Exchange driver.
400972 Servo Alarm
Low drive Voltage
Check out the drive power wiring putted in Driver. Or, check out DC48V.
400991 Servo Alarm
Reading Error on permanent memory
Exchange the driver.
400992 Servo Alarm
Writing Error on permanent memory
Exchange the driver.
400998 Servo Alarm
CPU Error
Exchange the driver.
400999 Servo Alarm
Parameter Error
Conrm the changed value of Parameter.
400a08 Head Interlock Error
Releasing the brake is impossible during Servo On.
-----
400b01 Feeder preparation complete
A pick up miss comp or disengaged Latch was detected.
Open the safety cover and conrm that there is no interference with the head, and
then, release the ready feeder.
400c01 Nozzle stocker down time out
Nozzle stock unit lower bound detection 1 was not turned on in prescribed time.
Please conrm the lower bound detection 1 sensor of nozzle stock unit.
400c02 Nozzle stocker down time out
Nozzle stock unit lower bound detection 2 was not turned on in prescribed time.
Please conrm the lower bound detection 2 sensor of nozzle stock unit.
400c03 Nozzle stocker down time out
Nozzle stock unit lower bound detection 3 was not turned on in prescribed time.
Please conrm the lower bound detection 3 sensor of nozzle stock unit.
400c04 Nozzle stocker down time out
Nozzle stock unit lower bound detection 4 was not turned on in prescribed time.
Please conrm the lower bound detection 4 sensor of nozzle stock unit.
400d01 Software Interlock Error
Head (Rear) NL axis's poor operation was detected, and the scram of the XY axis
was carried out.
Please perform a zeroing.
0911-001
4OM-1610
3-18
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
400d02 Software Interlock Error
Head (Rear) NL axis's poor operation was detected, and the scram of the XY axis
was carried out.
Please perform a zeroing.
400d03 Software Interlock Error
NL axis(Front) Interlock Detected. Please conrm the nozzle has not fallen when
you push the beam by the hand.
Please perform a zeroing.
400d04 Software Interlock Error
NL axis(Rear) Interlock Detected. Please conrm the nozzle has not fallen when
you push the beam by the hand.
Please perform a zeroing.
400d05 Software Interlock Error
L1 axis(Front) Interlock Detected. Please conrm the nozzle has not fallen when
you push the beam by the hand.
Conrm of Path line/Head excess pushing detection.
400d06 Software Interlock Error
L2 axis(Front) Interlock Detected. Please conrm the nozzle has not fallen when
you push the beam by the hand.
Conrm of Path line/Head excess pushing detection.
400d07 Software Interlock Error
L3 axis(Front) Interlock Detected
Conrm of Path line/Head excess pushing detection.
400d08 Software Interlock Error
L1 axis(Rear) Interlock Detected. Please conrm the nozzle has not fallen when
you push the beam by the hand.
Conrm of Path line/Head excess pushing detection.
400d09 Software Interlock Error
L2 axis(Rear) Interlock Detected. Please conrm the nozzle has not fallen when
you push the beam by the hand.
Conrm of Path line/Head excess pushing detection.
400d0a Software Interlock Error
L3 axis(Rear) Interlock Detected. Please conrm the nozzle has not fallen when
you push the beam by the hand.
Conrm of Path line/Head excess pushing detection.
400f01 Safety Cover
Safety cover
opened
Close the safety cover and lock it.
401001 Cart
No Cart
There is a possibility that the Front/Rear of Cart is missing. Please put the cart in.
401101 Emergency Stop Switch
The [emergency stop] switch was pressed. (Please conrm the nozzle has not
fallen when you push the beam by the hand.)
Please switch on a power supply after canceling an emergency stop switch and
screen return to normal display.
0911-001
4OM-1610
3-19
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
401201 Safety Cover
The safety cover opened. [K4]
Please shut a safety cover and push the [POWER ON] button.
401301 Shut-off Beam
The main circuit of the XY Beam was broken. [K**]
-----
401401 Head(Rear) Nozzle descending
Head (Rear) nozzle descent was detected. [A-B****]
Please perform a zeroing.
401501 Head(Front) Nozzle descending
Head (Front) nozzle descent was detected. [B-B****]
Please perform a zeroing.
401601 Head(Rear) Nozzle descending
Head (Rear) descent was detected. [A-B****]
Please perform a zeroing.
401701 Head(Front) Nozzle descending
Head (Front) descent was detected. [B-B****]
Please perform a zeroing.
401801 Detecting Feeder pickup miss Cmpnt(Rear)
A pickup-failed component (Rear) was detected. [DA-B****]
1.Open the cover.
2.Conrm suppressor, Disengaged Latch and remove the devices.
3.Close the cover and Lock it.
401901 Detecting Feeder pickup miss Cmpnt(Front)
A pickup-failed component (Front) was detected. [DB-B****]
1.Open the cover.
2.Conrm suppressor, Disengaged Latch and remove the devices.
3.Close the cover and Lock it.
401A01 Feeder Opening Sensor(Rear)
The feeder opening sensor (Rear) was shaded. [B****]
Please remove the factor which is shading the feeder opening sensor (rear), and
carry out zero return.
401B01 Feeder Opening Sensor(Front)
The feeder opening sensor (Front) was shaded. [B****]
Please remove the factor which is shading the feeder opening sensor (front), and
carry out zero return.
401C01 Detecting Feeder Disengaged Latch
（
Rear)
Disengaged Latch(Rear) was detected.
1.Open the cover.
2.Conrm suppressor, Disengaged Latch and remove the devices.
3.Close the cover and Lock it.
401D01 Detecting Feeder Disengaged Latch
（
Front)
Disengaged Latch(Front) was detected.
1.Open the cover.
2.Conrm suppressor, Disengaged Latch and remove the devices.
3.Close the cover and Lock it.
0911-001