4OM-1626-001_w.pdf - 第174页
4OM-1610 3-43 3. Error IDs and Remedial Procedures : Chap.3 091 1-001 Error ID Error Name, Description, Cause, and Remedy 423504 Error in NR-L1 axis STP input on NR-L1 axis was detected STP input is detected. The functio…
4OM-1610
3-42
3. Error IDs and Remedial Procedures : Chap.3
0911-001
Error ID Error Name, Description, Cause, and Remedy
423408 Error in NA-L2 axis
Motor disconnection of NA-L2 axis was detected
Disconnection to motor was detected.(Only stop mode)
Check the motor wiring.
423409 Error in NA-L2 axis
Error in control power voltage of NA-L2 axis
Control power for driver dropped.
Check out the Power supply line.(24V Line)
42340a Error in NA-L2 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42340b Error in NA-L2 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42340c Error in NA-L2 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42340d Error in NA-L2 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42340e Error in NA-L2 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42340f Error in NA-L2 axis
System Error on NA-L2 axis
System Error of internal driver.
Driver error is supposed if this problem happens frequently.
423410 Error in NA-L2 axis
Communication Error on NA-L2 axis
1. Conrm connection to communication cable.
2. Conrm Power supply(24V).
3. Conrm the communication setting of PCI board.
4. Conrm the address of driver and communication rate setting.
5. Conrm Firmware of Driver.
423501 Error in NR-L1 axis
Zeroing Error on NR-L1 axis
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423502 Error in NR-L1 axis
Out-of-Control of NR-L1 axis was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423503 Error in NR-L1 axis
Error in motor power voltage of NR-L1 axis
Motor power voltage dropped. Check out the Power supply line(48V Line)
4OM-1610
3-43
3. Error IDs and Remedial Procedures : Chap.3
0911-001
Error ID Error Name, Description, Cause, and Remedy
423504 Error in NR-L1 axis
STP input on NR-L1 axis was detected
STP input is detected. The function to stop motor by Hard signal.
423505 Error in NR-L1 axis
Over-current in NR-L1 axis
Abnormal current in motor output line was detected.
Conrm the motor wiring, supplying power.
423506 Error in NR-L1 axis
Limit sensor(+) on NR-L1 axis was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423507 Error in NR-L1 axis
Limit sensor(-) on NR-L1 axis was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423508 Error in NR-L1 axis
Motor disconnection of NR-L1 axis was detected
Disconnection to motor was detected.(Only stop mode)
Check the motor wiring.
423509 Error in NR-L1 axis
Error in control power voltage of NR-L1 axis
Control power for driver dropped.
Check out the Power supply line.(24V Line)
42350a Error in NR-L1 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42350b Error in NR-L1 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42350c Error in NR-L1 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42350d Error in NR-L1 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42350e Error in NR-L1 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.
42350f Error in NR-L1 axis
System Error on NR-L1 axis
System Error of internal driver.
Driver error is supposed if this problem happens frequently.
4OM-1610
3-44
3. Error IDs and Remedial Procedures : Chap.3
0911-001
Error ID Error Name, Description, Cause, and Remedy
423510 Error in NR-L1 axis
Communication Error on NR-L1 axis
1. Conrm connection to communication cable.
2. Conrm Power supply(24V).
3. Conrm the communication setting of PCI board.
4. Conrm the address of driver and communication rate setting.
5. Conrm Firmware of Driver.
423601 Error in NR-L2 axis
Zeroing Error on NR-L2 axis
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423602 Error in NR-L2 axis
Out-of-Control of NR-L2 axis was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423603 Error in NR-L2 axis
Error in motor power voltage of NR-L2 axis
Motor power voltage dropped.
Check out the Power supply line(48V Line)
423604 Error in NR-L2 axis
STP input on NR-L2 axis was detected
STP input is detected. The function to stop motor by Hard signal.
423605 Error in NR-L2 axis
Over-current in NR-L2 axis
Abnormal current in motor output line was detected.
Conrm the motor wiring, supplying power.
423606 Error in NR-L2 axis
Limit sensor(+) on NR-L2 axis was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423607 Error in NR-L2 axis
Limit sensor(-) on NR-L2 axis was detected
No use the function. Please check the driver-axis setting when error is detected
because there is a possibility of error of driver-axis setting.
423608 Error in NR-L2 axis
Motor disconnection of NR-L2 axis was detected
Disconnection to motor was detected.(Only stop mode)
Check the motor wiring.
423609 Error in NR-L2 axis
Error in control power voltage of NR-L2 axis
Control power for driver dropped.
Check out the Power supply line.(24V Line)
42360a Error in NR-L2 axis
Reserved Code
Reserved Function of driver. Please make inquiries when error is detected.