00197835-04_JC_PM_WF3_SX12_EN - 第55页
17 WF3 SX1/2 Grease the X-Feeder tables. 3.5 min 1 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e Machine Status OFF …
16 WF3 SX1/2 Check the guide roller and buffer at the protection covers. 1 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
7 If NOT, continue with next step. 8 Repeat all steps at the other roller of the
cover.
9 Repeat the procedure at the other cover.
17 WF3 SX1/2 Grease the X-Feeder tables. 3.5 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3, C4, C31, C33
www.asm-smt.com
1 Undock all feeders. 2 Move all feeder 10 cm back. 3 Spray grease on a cloth.
4 Clean and preserve the centering strip in-
side and outside.
5 Clean and preserve the holes in the cen-
tering strip.
6 Lock the feeders in the trolley.
17 WF3 SX1/2 Grease the X-Feeder tables. 3.5 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3, C4, C31, C33
www.asm-smt.com
7 Grease the roller on the right side. 8 Grease the roller on the left side. 9 Repeat all steps for the other feeder
tables.