00197835-04_JC_PM_WF3_SX12_EN - 第57页
18 WF3 SX1/2 Prepare the feeder, return all tables, close the covers and switch on machine. 1.25 min 1 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e…
17 WF3 SX1/2 Grease the X-Feeder tables. 3.5 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3, C4, C31, C33
www.asm-smt.com
7 Grease the roller on the right side. 8 Grease the roller on the left side. 9 Repeat all steps for the other feeder
tables.
18 WF3 SX1/2 Prepare the feeder, return all tables, close the covers and switch on
machine.
1.25 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Remove all loose components from the
feeder modules.
2 Cut the remaining tape directly at the
feeder.
3 After Cutting: Ensure to leave 2 holes
overlapping.
4 Return all COT. 5 Close all covers. 6 Switch on the machine.
18 WF3 SX1/2 Prepare the feeder, return all tables, close the covers and switch on
machine.
1.25 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
7 Do not press the start button.