YSP10_Mainte_E.pdf - 第21页

General Contents Chapter 5 Lubrication points and schedule 1. Lubrication tools and grease 5-1 1.1 Compatible grease 5-1 1.2 Grease gun 5-1 2. Lubrication points 5-2 2.1 Printing head unit 5-2 2.1.1 SY -axis 5-2 2.1.2 SZ…

100%1 / 130
General Contents
Chapter 3 Periodic maintenance items
1. Before beginning work 3-1
2. Monthly maintenance 3-2
2.1 Cleaning matrix plate 3-2
2.2 Motion check of edge clamp 3-3
2.3 Motioncheckofboardap 3-4
2.4 Suction unit 3-5
2.4.1 Cleaningandreplacingthelter 3-5
2.4.2 Visual inspection of blower hose 3-6
2.5 CX-axis, CY-axis and cleaning unit 3-7
2.5.1 Cleaning and lubricating the CX-axis 3-7
2.5.2 Cleaning and lubricating the CY-axis and the cleaning unit 3-13
2.6 Mask holder 3-16
2.6.1 Inspection and cleaning of mask holder plate 3-16
2.7 Base unit and others 3-17
2.7.1 Inspectingandcleaningthefanlters. 3-17
2.7.2 Replacingair/oilmistlterandcleaningcup. 3-18
3. 3-month maintenance 3-21
3.1 W-axis 3-21
3.1.1 Cleaning and lubrication of W-axis 3-21
3.2 PU-axis 3-24
3.2.1 Cleaning and lubricating the PU-axis 3-24
3.3 Z-axis 3-26
3.3.1 Cleaning and lubricating the Z-axis 3-26
3.4 SY-axis 3-29
3.4.1 Cleaning and lubricating SY-axis 3-29
3.5 SZ-axis 3-31
3.5.1 Cleaning and lubricating SZ-axis 3-31
3.5.2 Cleaning and Lubricating of SZ-axis with PSC 3-35
4. 6-month maintenance 3-39
4.1 X-axis and Y-axis 3-39
4.1.1 Cleaning and lubricating for X-axis and Y-axis 3-39
Chapter 4 The parts to be replaced and its procedures
1. Scraper unit 4-1
1.1 Metal squeegee 4-1
1.2 Urethane squeegee 4-2
2. Blower hose 4-3
3. Conveyor transfer belt 4-5
4. Mask vacuum unit 4-13
4.1 Cleaningandreplacingthemaskvacuumlter 4-13
General Contents
Chapter 5 Lubrication points and schedule
1. Lubrication tools and grease 5-1
1.1 Compatible grease 5-1
1.2 Grease gun 5-1
2. Lubrication points 5-2
2.1 Printing head unit 5-2
2.1.1 SY-axis 5-2
2.1.2 SZ-axis 5-3
2.2 Conveyor unit 5-4
2.2.1 W1-axis, W2-axis, W3-axis (conveyor auto width) 5-4
2.3 Table unit 5-5
2.3.1 X1-axis and X2-axis 5-5
2.3.2 Y-axis 5-6
2.3.3 Z-axis 5-7
2.3.4 PU-axis 5-8
2.4 Recognition unit 5-9
2.4.1 CX-axis 5-9
2.4.2 CY1-axis and CY2-axis 5-10
2.5 Other lubrication points 5-11
2.5.1 Cleaning unit 5-11
2.5.2 Suction unit 5-12
Appendix
1. Specification A-1
1.1 Air regulator unit A-1
1.1.1 Supply air pressure A-1
1.2 Power connection terminals A-2
1.3 Connection between machines A-3
1.3.1 PREVIOUS INTERFACE connector A-4
1.3.2 NEXT INTERFACE connector A-5
1.4 Adapted mask A-6
1.4.1 Themaskamesizeandthemaskstandardposition A-6
1.5 Inverter A-7
2. Periodic inspection check sheet A-9
3. User support A-12
3.1 YAMAHA Service website A-12
4. YSP10 Maintenance parts A-13
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay special
attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Introduction
Contents
1. About this manual i
2. Contents of each chapter ii
3. Maintenance list iii