YSP10_Mainte_E.pdf - 第23页
1. About this manual i Introduction 1. About this manual The instruction manual of this machine is written for those who operate this machine. Please read this manual carefully for corr ect operations and pay special att…
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay special
attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Introduction
Contents
1. About this manual i
2. Contents of each chapter ii
3. Maintenance list iii
1. About this manual
i
Introduction
1. About this manual
The instruction manual of this machine is written for those who operate this machine. Please read this
manual carefully for correct operations and pay special attention to safety precautions.
After reading through this manual, please use this manual as an occasional reference and keep it within
reach.
►
Parts descriptions
The maintenance part (part Nos.) given in this manual are the original part Nos. which were assigned to
the parts when this manual was issued. Because these part Nos. may be changed without prior notice, be
sure to verify the latest part Nos. before ordering parts.
Moreover, this document is not a periodical publication. See YAMAHA Service Website for the latest
informations.
n
NOTE
See Appendix "3. User support" for YAMAHA Service Website.
2. Contents of each chapter
ii
Introduction
2. Contents of each chapter
This manual is comprised of the following chapters.
►
Chapter 1 Maintenance
Describes operating conditions and environments necessary to maintain the machine performance, and
the importance of the daily check work and cleaning work. Setups to make before starting maintenance
work, consumable parts and maintenance tools as well as the necessary tools are also described.
►
Chapter 2 Daily maintenance items
Making checks and cleaning the machine are essential daily maintenance tasks for maintaining equipment
performance. Performing these tasks prevents unforeseen trouble and allows using the machine in an
optimum state.
►
Chapter 3 Periodic maintenance items
Describes maintenance tasks that should be performed periodically to maintain equipment performance.
Each maintenance items are set recommended maintenance intervals, such as "monthly", "3-month",
"6-month".
Describes details of maintenance items which are checking, cleaning, methods of lubrication to each axes
and parts replacement.
See "Chapter 4 The parts to be replaced and its procedures" for the details of the procedure.
►
Chapter 4 The parts to be replaced and its procedures
Describes how to replace the parts which needs to be replaced periodically, or recommended to be
replaced because of aging.
►
Chapter 5 Lubrication points and schedule
Provides information regarding the lubrication points, lubrication tools, and the lubrication schedule for
the axes described in "Chapter 3 Periodic maintenance items".
►
Appendix
Provides information regarding the specification, such as supply air pressure, power supply connection
unit, and input/output signals.
Also provides Inspection check sheet.