YSP10_Mainte_E.pdf - 第46页
2. The daily inspection and cleaning 2-8 Chapter 2 Daily maintenance items 2.6.2 Removable type When the solder etc. adheres to the solder drop prevention plate, detac h and clean it according to the following procedure.…
2. The daily inspection and cleaning
2-7
Chapter 2 Daily maintenance items
2.6 Solder drop prevention plate (option)
Check the solder drop prevention plate condition before starting daily operation. Check the following items.
►
Daily inspection items
No adherence of solder etc. on the solder drop prevention plate.
2.6.1 Fixed type
When some solder etc. adheres, wipe off using lint-free cloth with a few drops of ethanol.
n
NOTE
When the cleaning has difficulty, detach the squeegee before cleaning
Solder drop prevention plate
Fixed type
Solder drop prevention plate
Lint-free cloth (with a few drops of ethanol)
Solder adherence
53210-KMJ-00
2. The daily inspection and cleaning
2-8
Chapter 2 Daily maintenance items
2.6.2 Removable type
When the solder etc. adheres to the solder drop prevention plate, detach and clean it according to the
following procedure.
1
Detach the solder drop prevention
plate.
1. Loosen the mounting knobs of solder drop
prevention plate by turning them to
counterclockwise.
2. Detach the solder drop prevention plate from
the squeegee head as illustrated at right.
TIP
The mounting knob has non-drop mechanism upon
loosening.
2
Clean the solder drop prevention plate
by wiping out the solder adherence
with a lint-free cloth applied of a few
drops of ethanol.
3
Attach the solder drop prevention plate
to its original position.
1. Attach the solder drop prevention plate to
the squeegee head as illustrated at right.
2. Fix the solder drop prevention plate by
tightening the mounting knobs to clockwise.
Detaching solder drop prevention plate
Solder drop
prevention plate
Step 1
53211-KMJ-00
Cleaning solder drop prevention plate
Step 2
Lint-free cloth applied of
a few drops of ethanol
Solder adherence
53212-KMJ-00
Attaching solder drop prevention plate
Solder drop
prevention plate
Step 3
53213-KMJ-00
Chapter 3 Periodic maintenance items
Contents
1. Before beginning work 3-1
2. Monthly maintenance 3-2
2.1 Cleaning matrix plate 3-2
2.2 Motion check of edge clamp 3-3
2.3 Motion check of board flap 3-4
2.4 Suction unit 3-5
2.4.1 Cleaning and replacing the filter 3-5
2.4.2 Visual inspection of blower hose 3-6
2.5 CX-axis, CY-axis and cleaning unit 3-7
2.5.1 Cleaning and lubricating the CX-axis 3-7
2.5.2 Cleaning and lubricating the CY-axis and the cleaning unit 3-13
2.6 Mask holder 3-16
2.6.1 Inspection and cleaning of mask holder plate 3-16
2.7 Base unit and others 3-17
2.7.1 Inspecting and cleaning the fan filters. 3-17
2.7.2 Replacing air/oil mist filter and cleaning cup. 3-18
3. 3-month maintenance 3-21
3.1 W-axis 3-21
3.1.1 Cleaning and lubrication of W-axis 3-21
3.2 PU-axis 3-24
3.2.1 Cleaning and lubricating the PU-axis 3-24
3.3 Z-axis 3-26
3.3.1 Cleaning and lubricating the Z-axis 3-26
3.4 SY-axis 3-29
3.4.1 Cleaning and lubricating SY-axis 3-29
3.5 SZ-axis 3-31
3.5.1 Cleaning and lubricating SZ-axis 3-31
3.5.2 Cleaning and Lubricating of SZ-axis with PSC 3-35
4. 6-month maintenance 3-39
4.1 X-axis and Y-axis 3-39
4.1.1 Cleaning and lubricating for X-axis and Y-axis 3-39