YSP10_Mainte_E.pdf - 第8页
2. Label positions v Safety instructions In jur y f ro m to uc hin g mov in g pa r t s dur in g ma ch in e op e r at io n In jur y f ro m to uc hin g mov in g pa r t s dur in g ma ch in e op e r at io n Do n ot to uc h o…
2. Label positions
iv
Safety instructions
2. Label positions
The following warning/caution labels are attached to YAMAHA products to ensure safe and correct use.
Check that the information on each label is clearly legible and comply with the instructions.
For safety precautions other than those on the labels shown in this section, see the instructions in
"3. Safety".
n
NOTE
• Labels are basically attached to the positions as below, although they may differ slightly depending on specifications, etc.
• See "Power connection terminals" described in the appendix of the maintenance manual when connecting power to this
equipment.
█
Label positions
Warning/caution labels
Front side of YSP10 with extension conveyor of exit side (option)
■ Power connecting
■ Mask clamp
■
Conveyor opening
■ Camera in machine
■ Machine safety cover
■ Main switch
■ Cleaner unit
■ Solvent bottle
■ Front cover
■ Conveyor cover
■
Conveyor cover
93011-KMJ-00
2. Label positions
v
Safety instructions
Injury from touching moving parts during machine operation Injury from touching moving parts during machine operation
Do not touch or tamper with safety cover switches and do not
operate machine with the safety cover switch deactivated.
Do not operate machine with the cover detached.
• Hands or ngers might be caught between moving parts
and covers, causing injury.
• Hands or ngers might be pinched by moving parts,
causing injury.
Electrical shock hazard
Never place hands or fingers in machine during operation
such as when handling tray magazines.
Do not touch power supply inside cover.
Fire hazard Damage to machine or injury to person
Handle solvent carefully.
Before handling the product (equipment) always read manuals
and make sure you fully understand the contents.
Machine damage Machine damage
Do not use solvent other than specified.
Block off the path of solvent when not in use for 6 months or
more.
Machine damage Electrical shock hazard
Use proper size of gauze roll. Do not touch while power is active.
