00196591-04 UM S-Feeder Test Station EN
Titl e P age SIPLACE S-Feeder Test Station User Manual Edition 12/2014 EN
Titl
e
P
age
SIPLACE S-Feeder Test Station
User Manual
Edition 12/2014 EN
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
We have reviewed t he contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be
precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary
connections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 München
Germany
Item no.: 00196591-04
www.siplace.com Printed by ASM Assembly Systems
Contents
User Manual SIPLACE S-Feeder Test Station 3
Table of Contents
1 Introduction 5
1.1 General 5
1.2 Scope of Delivery 5
1.3 Accessories 6
1.4 EU Declaration of Conformity 6
1.5 Use of Symbols 6
1.6 Safety Instructions 7
1.7 Installation Location 7
1.8 Correct and Incorrect Use 8
2 Hardware Description 9
2.1 Overview of Devices 9
2.2 Introduction - Location Surface 9
2.3 Test Tapes for the Different Feeder Types 10
3 Installation MTC 2 11
3.1 System requirements 11
3.2 Installing the Software 11
3.3 Initializing the USB Port for the Camera 14
3.4 Connecting the S-Feeder Checking Device 14
3.4.1 Connecting to the Power Supply 14
3.4.2 Connecting the Serial Port for Data Exchange 15
3.4.3 Connecting the Device Ground 16
3.4.4 Switching the Checking Device ON/OFF 16
3.5 Initial Software Start 16
3.6 Calibrating the Camera Position 17
3.6.1 Setting up the Calibration Standard 18
3.6.2 Removing the Calibration Standard 18
3.7 Update 18
3.8 Software uninstall 19
4 Software Description 21
4.1 Starting the Program 21
4.2 Main Window 21
4.2.1 Live Image View 23
4.3 File Menu 23
4.4 Menu Options 23
4.5 Help Menu 24
5 Operating the S-Feeder Test Station 25
5.1 Performing the Test 25
5.2 Evaluating the Test Results 25
5.2.1 Results display 25
5.2.2 Detailed Measurements View 26
5.2.3 Error Images 27
5.2.3.1 Measurements Outside the Tolerance 27
5.2.3.2 Repeat Accuracy Insufficient 27
5.2.3.3 Unable to Measure At Least 3 Points 27
5.2.3.4 Toothed Wheel Did Not Move 28