Empty Tape Duct.pdf - 第16页
1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 SIPLACE 08/2007 Edition 16
SIPLACE 1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4
08/2007 Edition
15
1.9 Adjusting the Tape cutter
: Loosen the 4 tape cutter screws.
Push the tape cutter all the way towards the machine and tighten the screw again.
1
Make sure the Original Screw washer is there. This will ensure that the distance between the em-
pty tape duct and cutter opening is optimized. 1
1
1
1
1
1
1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 SIPLACE
08/2007 Edition
16