Empty Tape Duct.pdf - 第6页

1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 SIPLACE 08/2007 Edition 6 A knocking n oise is prod uced by t he cutter unit hitting the deflector plate while cutting. 1 1 The solution is to red…

100%1 / 18
SIPLACE 1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4
08/2007 Edition
5
1 Assembly instructions
Special design Empty Tape Duct
SIPLACE HS-60 / D4
1.1 Working principle
Assembling the Special Design (SOKO) Empty Tape Duct on the machine will prevent the collision
of tape cutter on the empty tape duct while the tape cutter is cutting. 1
1
1
1
1
1
1
1
1
1
18 mm gap
14 mm gap
Empty tape guide channel
Empty tape duct (special design)
1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4 SIPLACE
08/2007 Edition
6
A knocking noise is produced by the cutter unit hitting the deflector plate while cutting. 1
1
The solution is to reduce the width of the empty tape duct unit deflector. 1
1
1
Redesign of empty tape duct
reduces the width from 18
mm to 14 mm.
SIPLACE 1 Assembly instructions Special design Empty Tape Duct SIPLACE HS-60 / D4
08/2007 Edition
7
1.2 Requirements
SIPLACE HS-60 1
SIPLACE D4 1
1.3 Restrictions
The maximum tape height should not exceed 12mm. 1
The option short nozzles for high capacitors cannot be used. 1
1.4 Scope of delivery
Assembly kit Special design Empty Tape Duct (item no.: 00166800-xx) 1
Assembly instructions Special design Empty Tape Duct (item no.: 00196028-xx) 1
1.5 Tools required
Allen key set 1
1