00196478-08_MM_SX12DX12_en - 第75页
Major Maintenance 5.8.5 Final work Maintenance Tasks for Vacuum Pump Maintenance Manual SIPLACE SX1/SX2/DX1/DX2 75 5.8.5 5 . 8 . 5 F in a l w o r k Final work ► Installation is performed by fo llowing the above instructi…
Major Maintenance
Maintenance Tasks for Vacuum Pump 5.8.4 Performing Maintenance Tasks
74 Maintenance Manual SIPLACE SX1/SX2/DX1/DX2
5.8.4
5.8.4 Performing Maintenance Tasks
Performing Maintenance Tasks
SXDX12V2
5.8.4.1
5.8.4.1 Checking/Replacing the Filter Insert
Checking/Replacing the Filter Insert
NOTICE
Observe the manufacturer's instructions
► For more information about maintenance intervals and about how to perform the individual
maintenance tasks, read the manufacturer's instructions for your vacuum pump.
NOTICE
Observe the assembly instructions
► For these tasks, also read the "Assembly instructions SX1/SX2/DX1/DX2" [00196614-xx].
► Open the edgewise retaining clamp of the filter casing
and remove the cap.
► Remove the vacuum filter (1).
► Check the vacuum filter and replace it, if necessary
(filter insert [03077677-xx]).
Major Maintenance
5.8.5 Final work Maintenance Tasks for Vacuum Pump
Maintenance Manual SIPLACE SX1/SX2/DX1/DX2 75
5.8.5
5.8.5 Final work
Final work
► Installation is performed by following the above instructions in the reverse order. Also observe the
following instructions:
Compone nt Supply - Manual Tables - Fitting Pr otections - SW Version
SXDX12V1V2 – Tape Cutter – Waste Tape Chute – Pay Attention to the Plastic Strips – SW Version
Manual tables only:
WARNING!
WARNING! There is a risk of injury on manual
tables without the two protections.
► Fit the two protections.
CAUTION!
Make sure that the plastic strips (1) (if present) are locat-
ed behind the plate (2) when you hook up the used tape
chute.
The black-yellow hatched label must be completely visi-
ble.
Major Maintenance
Maintenance Tasks for Vacuum Pump 5.8.5 Final work
76 Maintenance Manual SIPLACE SX1/SX2/DX1/DX2