NR_Mechanischer_Stopper - 第171页
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D 3 / HF- / X-Series Edition 06/2007 171 O S tick the valves onto the mounting tub with d oub le-sided adhesive tape as shown in the fig- ur…
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
170
13.4.2 Cable and hose laying PA1
O Label the cables and pneumatic lines of the two stoppers to prevent any mix-ups.
O Connect both air pressure supply hoses (PUN 3) with both magnetic valves.
O Route the supply air hose of the valve for PA2 with the cables of the stopper of PA1 into PA2 .
O Bundle the cables and hoses with cable ties and fix the cables in position with self-adhesive
cable clamps.
O Plug the connectors of the connecting lines onto the conversion board according to the circuit
diagram (see Fig. 151, page - 175).
air pressure supply
magnetic valve
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
171
O Stick the valves onto the mounting tub with double-sided adhesive tape as shown in the fig-
ures.
Fig. 147 Valves
13
Make sure that the trailing cables of the conveyor sides are not impeded in their movement. 13
13
Valves
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
172
13.4.3 Cable and hose laying PA2
O Route the cables in the cable duct to the conversion boards of the PCB conveyor.
Fig. 148
13