NR_Mechanischer_Stopper - 第180页
Assembly Instructions PCB Stopper Sin gle Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series Edition 06/2007 180 14.1.1 Complete overview Fig. 154 Overview S-27HM (Fig. 1) Sin gle conveyor
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
179
14 Retrofitting SIPLACE S-27HM
14.1 Preparatory work
Caution: Before the stopper is mounted in the machine, it should be adjusted with the guide strip
and the shims. Care should be taken to ensure that the stopper is not too loose or too tight. The
graduation of the shims is 0.1mm.
(See also Fig. 209, page - 232.) 14
14
O Changeover to the SITEST.
O Select "Conveyor" and "Conveyor width".
O Adjust the conveyor width to maximum.
O Undock the component trolley on both sides.
O Shut down the operating system and switch off the placement machine at the main switch.
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
180
14.1.1 Complete overview
Fig. 154 Overview S-27HM (Fig. 1) Single conveyor
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
181
Fig. 155 Overview S-27HM (Fig. 2) Single conveyor
Legend (Figs. 1 and 2) Single conveyor 14
1 Lifting table plate Option PCB Stopper
ET
7 Energy chain holder
2 Basic unit Stopper S27 8 DIN EN ISO 7380-M3 x 6-A2
3 Holder for guide strip S27 9 DIN 934 - M 3 - A2
4 Guide strip S27 10 Distance block for energy chain,
compl.
5 DIN912-M4 x 40-A2-70 11 Energy chain E04
6 DIN912-M5 x 20-A2-70