NR_Mechanischer_Stopper - 第231页
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D 3 / HF- / X-Series Edition 06/2007 231 19 General troubleshooting If a stopper fails, generally a conveyor track can also be switche d ove…
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
230
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
231
19 General troubleshooting
If a stopper fails, generally a conveyor track can also be switched over to laser light barrier. The
mechanical stopper on the other track remains active and component placement can continue on
both conveyor tracks. 19
Fig. 207
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
232
If the stopper does not keep its position, it can be fixed in the basic housing with a plastic screw
(see figure). 19
Fig. 208
If the stopper is very loose as it moves in the guide strip, this suggests the pretensioning in the
guide strip is no longer correct. This can be rectified by placing a "washer 5 x 7 x 0,15" [03040600-
xx] under the plastic slides (see figure). 19
Fig. 209