00193875-01 - 第12页
2 Introduction and basic terms SIPLACE Software Guide Version 101.xx 2.2 Overview Issue 05/03 EN 12 2.2.1 Overview of the SIPLACE CS 2 Fig. 2.2 - 2 Overview of the SIPLACE CS Key to Fig. 2.2 - 2 (1) Collect & Place p…
SIPLACE Software Guide Version 101.xx 2 Introduction and basic terms
Issue 05/03 EN 2.2 Overview
11
A station may exist as part of a line or may be the only machine in a line. 2
Every station is equipped with a "station computer" which is mounted over the output conveyor on
a support. 2
A monitor and a keyboard with an integrated trackball and mouse buttons are mounted above the
cover on a pivot arm (see Fig. 2.2 - 1). 2
NOTE
You can operate the station computer software either via the keyboard or via the trackball. 2
2 Introduction and basic terms SIPLACE Software Guide Version 101.xx
2.2 Overview Issue 05/03 EN
12
2.2.1 Overview of the SIPLACE CS
2
Fig. 2.2 - 2 Overview of the SIPLACE CS
Key to Fig. 2.2 - 2
(1) Collect & Place placement head on gantry 1
(2) Collect & Place placement head on gantry 2
(3) Nozzle changer for Collect & Place placement head on gantry 1
(4) Nozzle changer for Collect & Place placement head on gantry 2
(5) Location 1 (with changeover table)
(6) Location 3 (with changeover table)
(7) PCB conveyor
2
Transport direction
5
1
7
3
6
4
2
SIPLACE Software Guide Version 101.xx 2 Introduction and basic terms
Issue 05/03 EN 2.2 Overview
13
2.2.2 Overview of the SIPLACE CF
2
Fig. 2.2 - 3 Overview of the SIPLACE CF with WPC
Key to Fig. 2.2 - 2
(1) Collect & Place placement head on gantry 1
(2) Pick & Place placement head on gantry 1
(3) Nozzle changer for Collect & Place placement head
(4) Nozzle changer for Pick & Place placement head
(5) Location 1 (with WPC)
(6) Location 2 (with component table)
(7) Location 3 (with changeover table)
(8) PCB conveyor
Transport direction
5
2
8
3
7
4
1
6