00193875-01 - 第38页
3 Graphical user interface SIPLA CE Software Guide Version 101.xx 3.3 User interface - views and menus Issue 05/03 EN 38 Example of init ial p assword allo cation 3 3 Fig. 3.3 - 6 "Change line engineer password - in…
SIPLACE Software Guide Version 101.xx 3 Graphical user interface
Issue 05/03 EN 3.3 User interface - views and menus
37
Access level... 3
It is possible to protect some of the functions of the user interface against unauthorized use by
setting an access level and allocating a password. Functions which are not accessible from a
given access level cannot be executed since the associated push buttons, radio buttons and
menu commands are either inactive or not displayed. 3
You can choose between the access levels "Operator", "Line engineer" and "Service". Passwords
can be allocated for the access levels "Line engineer" and "Service". 3
Æ Click the Access level... menu item.
The "Access level" dialog box is displayed.
3
Fig. 3.3 - 5 "Access level" dialog box
Æ Click the radio button for the required access level.
Æ Click the "Change password" button to the right of the access level if you want to allocate a
password or change an existing password.
The dialog box for password entry is now displayed.
3 Graphical user interface SIPLACE Software Guide Version 101.xx
3.3 User interface - views and menus Issue 05/03 EN
38
Example of initial password allocation 3
3
Fig. 3.3 - 6 "Change line engineer password - initial allocation" dialog box
Æ Click the "New password" text box and enter the required password.
Æ Click the "Confirm password" text box and re-enter the password.
Æ Click the OK button to confirm the password.
Example for the modification of an existing password 3
3
Fig. 3.3 - 7 "Change line engineer password - change an existing password" dialog box
Æ Click the "Old password" text box and enter the current password.
The other two text boxes now become active.
Æ Click the "New password" text box and enter the new password.
Æ Click the "Confirm password" text box and enter the new password for a second time.
Æ Click the OK button to confirm the password.
Æ Click OK to close the "Access level" dialog box.
SIPLACE Software Guide Version 101.xx 3 Graphical user interface
Issue 05/03 EN 3.3 User interface - views and menus
39
Control mode... 3
The control mode determines how the station is supplied with the necessary placement data. 3
Æ Click the Control mode... menu item.
The "Control mode" dialog box is displayed.
3
Fig. 3.3 - 8 "Control mode" dialog box
Control modes: 3
Stand Alone (for test purposes only)
This mode allows you to load a panel (placement program) for test and service purposes from the
station computer using the "New panel..." menu item.
The necessary data must be located on the station computer’s hard disk. The machine runs with-
out a higher-level computer (programming system). 3
3
SIPLACE Pro
Establishes the connection to the SIPLACE C Pro programming system. 3
3
Æ Activate the radio button for the required control mode.
Æ Click OK to make your settings active.