np134 mechanical reference-1.1e.pdf.pdf - 第104页

2. Connecting the Air Objective Connect the air hose to the machine and adjust the regulator so that sufficient air pressure is supplied to the machine. Procedure 1. Connect the drain hoses to the filter regulator. Note:…

Notes:

Part 4 Chapter 1 Leveling the Machine

Edition 1.0 4-1-2 NP-134E/134ME Mechanical

2. Connecting the Air

Objective

Connect the air hose to the machine and adjust the regulator so that sufficient air

pressure is supplied to the machine.

Procedure

1. Connect the drain hoses to the filter regulator.

Note: The drain hoses should be ø 4 ~ 5 (inside) and ø 10 (outside).

2. Connect the hose to the air inlet.

3. Pull up on the regulator knob to release the lock.

4. Adjust the valve handle until the pressure level indicated at the regulator shows

0.5 MPa (5 kgf/cm

5. Push the regulator knob down to lock it.

Note: The hose is not supplied by Fuji.

NP1MS051

400SH ( for 1/2" hose) socket

Drain hoses

Hose

400PM plug

Handle

Part 4 Chapter 2 Connecting the Air

Edition 1.0 4-2-1 NP-134E/134ME Mechanical

Notes:

Part 4 Chapter 2 Connecting the Air

Edition 1.0 4-2-2 NP-134E/134ME Mechanical