SiplaceX4_en - 第11页
1 - 3 S tudent Guide SIPLACE X Edition 09/2005 1 Operational safety 3 1 Operational safet y 1.1 Safety instructions The knowledge and adhere nce to the safety rules of the user ma nual of the SIPLACE X is pre- condition …
1 - 2
Student Guide SIPLACE X
Contents Edition 09/2005
2
1 - 3
Student Guide SIPLACE X
Edition 09/2005 1 Operational safety
3
1 Operational safety
1.1 Safety instructions
The knowledge and adherence to the safety rules of the user manual of the SIPLACE X is pre-
condition to any operation on the machine.
The following safety rules are an abstract of chapter 1 "Operational Safety" of the user manual of
the SIPLACE X.
1.1.0.1 Safety of operators and other persons
➠ Machine operators must only carry out work for which they have been adequately trained and
with which they are totally familiar.
WARNING 1
The system is electrically driven. When electrical devices are in use, certain parts carry dangerous
voltage levels.
➠ Switch off at the main switch and disconnect the placement system from the power supply be-
fore carrying out any work on live components.
➠ Lock the systems.
There is a risk of death, severe injury and/or considerable damage to equipment if these instruc-
tions are not followed.
1.1.0.2 Safety of plant and equipment
➠ Never make changes, however minor, unless you are totally aware of the effect they will have
on the overall functioning of the system.
➠ The stations must always be set up, retooled and maintained by appropriately trained person-
nel.
➠ Only use SIEMENSDEMATIC original spare parts and authorized accessories. The use of
other parts will affect safety and will invalidate the liability for any consequential damage.
➠ Do not make modifications to the safety equipment. In particular, NEVER bypass circuit-break-
ers or remove safety devices.
1 - 4
Student Guide SIPLACE X
1 Operational safety Edition 09/2005
4
1.2 Warning labels
1.2.1 Warning labels on the machine
Their design meets the requirements of ISO 3864-2 and ANSI Z535.4.
1.2.1.1 Warning label W201
1.2.1.2 Warning label W203
1.2.1.3 Warning label W204
SAFE OPERATION OF THE MACHINE
Safe operation of the machine depends absolutely
on the operator being familiar with the user manual
and safety instructions and putting them into effect.
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the arms
and hands.
Do not reach into the machine while it is running
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the arms
and hands.
Do not reach into the machine while it is running