SiplaceX4_en - 第3页
1 - 1 S tudent Guide SIPLACE X Edition 09/2005 Course introduction SIPLACE X T raining for FSE‘s 1 Course introduction SIPLACE X T raining for FSE‘s This documentation will lead you through the SIPLACE X training for FSE…
(The reproduction, transmission or use of this document or its
contents is not permitted without written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design,
are reserved.)
(We have checked the contents of the printed documentation to
ensure that it is in agreement with the hardware and software
described therein. However, since discrepancies cannot be ruled out,
we cannot assume responsibility for complete agreement.
The information given in this printed documentation is however
regularly reviewed and necessary corrections included in
subsequent editions.
We would appreciate any suggestions for improvements.)
Siemens AG 2002 All rights reserved Subject to change without prior notice
Order No.: 00194620-03 Siemens Aktiengesellschaft
To be ordered from:
SIEMENS AG L&A EA 1 SM SE E
Rupert-Mayer-Strasse 44
D - 81359 Muenchen
Printed in the Federal Republic of Germany.
UNIX is a trade mark of AT&T
Windows is a trade mark of Microsoft
1 - 1
Student Guide SIPLACE X
Edition 09/2005 Course introduction SIPLACE X Training for FSE‘s
1
Course introduction
SIPLACE X Training for FSE‘s
This documentation will lead you through the SIPLACE X training for FSE‘s.
Course duration: 10 Days
Prerequisites
SIPLACE HF/HF3 Training
SIPLACE Pro Programming Training
FSE Laptops with executable Service Tools
Target Group
SIPLACE service personnel
SIPLACE setup engineers
Course Objectives
The training is especially setup for SIPLACE experienced technicians enabling them to go for the
Siplace X, with the three machines types X2, X3 and X4.
The participants knows the different parts of a SIPLACE X depend on the Siplace HF and their
specific function.
They are able to operate the SITEST 601.x software, can perform parts replacement according to
spare parts definition and following adjustments as well as a machine calibration.
Using hand-on exercises the participants learn the operation of the SAT-Box and the Caccia soft-
ware.
They understand the functional relations and the machine principles in detail and can thus locate
and eliminate machine errors.
He can perform the head modularity on the machines and knows the MTC2 option on the
SIPLACE X.
1 - 2
Student Guide Siplace X
Course Contents Edition 09/2005
2
Course Contents
Introduction
– General Introduction
– Curriculum of the course
– Requirements of the participants
SIPLACE Safety Considerations
– SIPLACE Safety Instructions
– Safety equipment
– Energy state and residual voltages after switching off the main switch
– Disabling the compressed air Supply
– ESD guidelines
Machine overview:
– Overall View
– Power supply-, pneumatic-, axis-, computer unit
– Placement heads and nozzle changer
– Feeder tables and tape cutter
– Control structure
Control and Communication
– Overview Network and Network addresses
– Communication on the Siplace X
– CAN Bus communication Axis control and vision system
– General overview track signals and axis dynamic
Services to the machine:
– General Overview
– Power supply Transformer 1and 2, Computer unit and Axis unit
– Safety- and Control Loop
– General Overview Pneumatic system
– Pneumatic supply placement heads, docking unit and tape cutter
– Vacuum supply on the placement heads