SiplaceX4_en - 第335页

1 - 19 S tudent Guide SIPLACE X Edition 09/2005 7 T win-Head 19 7.4 Adjustment s 7.4.1 Description of the boards on the T win- Head All described adjustment s in this chapter are he ad specific and are necessary here for…

1 - 18

Student Guide SIPLACE X

7 Twin-Head Edition 09/2005

Please Note

1 - 19

Student Guide SIPLACE X

Edition 09/2005 7 Twin-Head

7.4 Adjustments

7.4.1 Description of the boards on the Twin- Head

All described adjustments in this chapter are head specific and are necessary here for the

Twin Head.

7.4.1.1 Head adapter Twin- Head

The head adapter board connects the head interface from the bottom side directly.The main board

of Twin head segment 1 and 2 is connected via ribbon cable to the adapter board. This head

adapter must be changed for head modularity, if you use a C&P head.

Fig. 7.4 - 1 Head adapter Twin head

Please Note: The ribbon cable sets for the Twin head segment 1and 2 are different.

(1) Connector Z-Axis Twin head 1 (2) Connector D-Axis Twin head 1

(3) Connector DP-Axis Twin head 2 (4) Connector Z-Axis Twin head 2

(5) DIP Switch (without function) (6) LED C167 = ON TQM Module on the head

interface C500 --> OK

(to 5) PP1 Boot CAN Processor Twin Segm. 1 (to 5) PP1 Reset CAN Processor Twin Segm. 1

(to 5) PP2 Boot CAN Processor Twin Segm. 2 (to 5) PP2 Reset CAN Processor Twin Segm. 2

C167

1 - 20

Student Guide SIPLACE X

7 Twin-Head Edition 09/2005

7.4.1.2 Twin- Head main board

The main board is mounted directly on the top of the frame of the TWIN-head. This board is con-

nected to the head adapter via two ribbon cable (one ribbon cable for each axis). The difference

to the Twin Head on the HF machine is now, that we don‘t use the 16 Bit Can Prozessor on each

main board. The control of both Twin heads will make the Can Prozessor on the head interface

C500.

Fig. 7.4 - 2 Main board at TWIN-head (00352833-xx)

1. Connector for the 16 Bit CAN Bus Processor only for HF-machine, in future we use only the 16

Bit Processor on the head interface on HF/X machine (Control the analog or digital vacuum-

generator).

2. LED´S signs (Description from top to bottom/ on the board in German language)

– D8 without function (retract unit)

– D7 KLEMM: (retract unit)

– D6 BERO: Z-axis top (not used)

– D1 DRUCK: at the moment not used/ Z-Druck (Z-Pressure)

X21