SiplaceX4_en - 第4页
1 - 2 S tudent Guide Siplace X Course Contents Edition 09/2005 2 Course Content s Introduction – General Intr oduction – Curriculum of the cour se – Requirement s of the participant s SIPLACE Safety Considerations – SIPL…
1 - 1
Student Guide SIPLACE X
Edition 09/2005 Course introduction SIPLACE X Training for FSE‘s
1
Course introduction
SIPLACE X Training for FSE‘s
This documentation will lead you through the SIPLACE X training for FSE‘s.
Course duration: 10 Days
Prerequisites
SIPLACE HF/HF3 Training
SIPLACE Pro Programming Training
FSE Laptops with executable Service Tools
Target Group
SIPLACE service personnel
SIPLACE setup engineers
Course Objectives
The training is especially setup for SIPLACE experienced technicians enabling them to go for the
Siplace X, with the three machines types X2, X3 and X4.
The participants knows the different parts of a SIPLACE X depend on the Siplace HF and their
specific function.
They are able to operate the SITEST 601.x software, can perform parts replacement according to
spare parts definition and following adjustments as well as a machine calibration.
Using hand-on exercises the participants learn the operation of the SAT-Box and the Caccia soft-
ware.
They understand the functional relations and the machine principles in detail and can thus locate
and eliminate machine errors.
He can perform the head modularity on the machines and knows the MTC2 option on the
SIPLACE X.
1 - 2
Student Guide Siplace X
Course Contents Edition 09/2005
2
Course Contents
Introduction
– General Introduction
– Curriculum of the course
– Requirements of the participants
SIPLACE Safety Considerations
– SIPLACE Safety Instructions
– Safety equipment
– Energy state and residual voltages after switching off the main switch
– Disabling the compressed air Supply
– ESD guidelines
Machine overview:
– Overall View
– Power supply-, pneumatic-, axis-, computer unit
– Placement heads and nozzle changer
– Feeder tables and tape cutter
– Control structure
Control and Communication
– Overview Network and Network addresses
– Communication on the Siplace X
– CAN Bus communication Axis control and vision system
– General overview track signals and axis dynamic
Services to the machine:
– General Overview
– Power supply Transformer 1and 2, Computer unit and Axis unit
– Safety- and Control Loop
– General Overview Pneumatic system
– Pneumatic supply placement heads, docking unit and tape cutter
– Vacuum supply on the placement heads
1 - 3
Student Guide SIPLACE X
Edition 09/2005 Course Contents
3
Siplace Axis Tester:
– Check and control of the dynamics with the SAT Box.
– Download to the SAT-Box
Gantry
– General setup and functionality of the gantry
– Demonstration and explanation of the gantry reference run
– Spare part replacement and adjustment work at the gantry axis
– Axis controlling and positioning of the gantry axis
– Control of the track signals with the Track signal tester
6/12 Collect & Place Head:
– General overview
– Demonstration and explanation of the head reference run
– Pick up and placement cycle on the 6 nozzle / 12 nozzle C&P head
– Spare parts replacement and adjustments at the C&P head
– Axis controlling and positioning of the C&P head axis
– Vacuum system
– LED function on head boards
– Control of the track signals
20 Collect & Place Head:
– General overview
– Demonstration and explanation of the head reference run
– Pick up and placement cycle on the 20 nozzle C&P head
– Spare parts replacement and adjustments at the C&P head
– Axis controlling and positioning of the C&P head axis
– Vacuum system
– LED function on head boards
– Control of the track signals