SiplaceX4_en - 第5页
1 - 3 S tudent Guide SIPLACE X Edition 09/2005 Course Contents 3 Siplace Axis T ester: – Check and control of the dynamics with the SA T Box. – Download to th e SA T -Box Gantry – General setup and func tion ality of the…
1 - 2
Student Guide Siplace X
Course Contents Edition 09/2005
2
Course Contents
Introduction
– General Introduction
– Curriculum of the course
– Requirements of the participants
SIPLACE Safety Considerations
– SIPLACE Safety Instructions
– Safety equipment
– Energy state and residual voltages after switching off the main switch
– Disabling the compressed air Supply
– ESD guidelines
Machine overview:
– Overall View
– Power supply-, pneumatic-, axis-, computer unit
– Placement heads and nozzle changer
– Feeder tables and tape cutter
– Control structure
Control and Communication
– Overview Network and Network addresses
– Communication on the Siplace X
– CAN Bus communication Axis control and vision system
– General overview track signals and axis dynamic
Services to the machine:
– General Overview
– Power supply Transformer 1and 2, Computer unit and Axis unit
– Safety- and Control Loop
– General Overview Pneumatic system
– Pneumatic supply placement heads, docking unit and tape cutter
– Vacuum supply on the placement heads
1 - 3
Student Guide SIPLACE X
Edition 09/2005 Course Contents
3
Siplace Axis Tester:
– Check and control of the dynamics with the SAT Box.
– Download to the SAT-Box
Gantry
– General setup and functionality of the gantry
– Demonstration and explanation of the gantry reference run
– Spare part replacement and adjustment work at the gantry axis
– Axis controlling and positioning of the gantry axis
– Control of the track signals with the Track signal tester
6/12 Collect & Place Head:
– General overview
– Demonstration and explanation of the head reference run
– Pick up and placement cycle on the 6 nozzle / 12 nozzle C&P head
– Spare parts replacement and adjustments at the C&P head
– Axis controlling and positioning of the C&P head axis
– Vacuum system
– LED function on head boards
– Control of the track signals
20 Collect & Place Head:
– General overview
– Demonstration and explanation of the head reference run
– Pick up and placement cycle on the 20 nozzle C&P head
– Spare parts replacement and adjustments at the C&P head
– Axis controlling and positioning of the C&P head axis
– Vacuum system
– LED function on head boards
– Control of the track signals
1 - 4
Student Guide Siplace X
Course Contents Edition 09/2005
4
Twin Head:
– General overview
– Demonstration and explanation of the head reference run
– Pick up and placement cycle on the twin head
– Structure and functionality of the head
– Exchanging the twin head
– Spare parts replacement and adjustments at the twin head
– Axis controlling and positioning of the twin head axis
– Vacuum system
– Control of the track signals
Calibration:
– Components of the User Interface
– Overview of the machine calibration
– Zero Point Corrections on the C&P and P&P heads
– Carry out the Calibration with single calibration menus and complete machine calibration
– Control of the track signals
Pneumatic Tape cutter (Docking unit):
– General information
– Preparation and removal of the Tape cutter
– Cutter blade and spare part exchange on the tape cutter
– Reinstallation of the tape cutter
– Functional check in the machine
Transport system:
– General Information and technical data about single and dual conveyor
– Mechanical structure and functionality of the conveyor
– Configuration flexible dual conveyor
– Electrically structure and communication to the machine via the transport control board
– Spare part replacement and adjustment work at the conveyor
– Calibrate and adjustments of the conveyor
– Configuration of the flexible conveyor