SiplaceX4_en - 第546页
1 - 3 S tudent Guide SIPLACE X Edition 09/2005 12 Siplac e X - Head Modularity 3 12 Siplace X - Head Modularity 12.1 Head Modularity A very useful feature in the SIPLACE family is its Head Modularity HM . A simple ha ndl…
1 - 2
Student Guide SIPLACE X
Contents Edition 09/2005
2
1 - 3
Student Guide SIPLACE X
Edition 09/2005 12 Siplace X - Head Modularity
3
12 Siplace X - Head Modularity
12.1 Head Modularity
A very useful feature in the SIPLACE family is its Head Modularity HM. A simple handling to
change the head, the machine can be fit to the current production requirements. For the SIPLACE
X machine, we have the following possibilities of the head configuration:
Fig. 12.1 - 1 Head modularity Siplace X
PA1 PA2
X2
Gantry3
TH
6 / 12 /C&P20/
TH
Gantry1
X2
Gantry3
6
6 / 12 / C&P20
Gantry1
X2
Gantry3
12
12 / C&P20
Gantry1
X3 6 / 12
Gantry4 Gantry3
TH / 6
6 / 12
Gantry1
X3 C&P 20
Gantry4 Gantry3
TH / 6 / 12
C&P 20
Gantry1
X4 6 / 12
Gantry4 Gantry3
6
6 / 12
Gantry1 Gantry2
6
X4 C&P 20
Gantry4 Gantry3
6 / 12
C&P 20
Gantry1 Gantry2
6 / 12
X4 C&P 20
Gantry4 Gantry3
6 / 12 / C&P20
C&P 20
Gantry1 Gantry2
6 / 12 / C&P20
PA1 Placement Area1 PA2 Placement Area2
1 - 4
Student Guide SIPLACE X
12 Siplace X - Head Modularity Edition 09/2005
4
12.1.1 Production requirements
Please Note:
The reconfiguration of the Siplace X machine should exist for a longer production time of a product
and not occur by the week because the configuration and the calibration of the machine, depend
of the machine type and the number of heads, uses approximately one day. 12
Which decisions must be taken before head exchange?
Fig. 12.1 - 2 Means of deciding between C&P head and Twin head
Please Note:
In the case of a PCB with different component sizes, you should decide for which C&P head install
the 12 segment C&P head or 6 segment C&P head with ir without DCA camera
(see Fig. 12.1 - 3) or the 20 segment C&P head. 12
Only IC`s respective Odd
shape placement?
Mixed fast IC`s respective
Odd shape placement?
Only fast chip`s and IC`s
placement?
X2: Gantry 1 / 3 -->Twin head
X3: Gantry 1 / 4 -->6 Segment C&P head
Gantry 3 -->Twin head
X2: Gantry 1 --> 12 Segment C&P head
Gantry 3 --> Twin head
X3: Gantry 1/4 --> 2x12 or 2x20 Segment
C&P head
Gantry 3 --> 6 Segment C&P head
X4: Gantry 1 / 4 Æ 20 Segment C&P head
Gantry 2 / 3 Æ 6/12 Segment C&P head
X2: Gantry 1 -->C&P head
Gantry 3 -->Twin head
X3: Gantry 1 -->12 Segment C&P head
Gantry 4 -->6 Segment C&P head
Gantry 3 -->Twin head
Yes
Yes
Yes