SiplaceX4_en - 第598页
1 - 31 S tudent Guide SIPLACE X Edition 09/2005 13 MTC 2 31 13.2.8.2 "Matrix-tray changer" view Fig. 13.2 - 9 "Matrix-tray changer" view (Example: location 2) Key 1. Selected c assette 2. Levels in th…
1 - 30
Student Guide SIPLACE X
13 MTC 2 Edition 09/2005
30
Placement functions of the MTC 2 13
➠ Click on the symbol in the toolbar of the main view to select the "Feeders" menu item.
When the
"Feeders" menu command is called for the first time after the station computer soft-
ware is started, the user interface is switched to the
"Empty tracks"view.
➠ Click the button for the MTC 2 at location 2 or the button for the MTC 2 at location 4.
The "Matrix-tray changer" view is displayed for the selected location (see
Fig. 13.2 - 9).
NOTE
The button for the MTC 2 at the relevant location is only displayed if an MTC 2 is available there.
NOTE
If a set-up is available for an MTC 2, it is displayed in the main view (see
Fig. 13.2 - 8) in the representation of for the relevant MTC 2.
If you click on it, the "Matrix-tray changer" view (see
Fig. 13.2 - 9) appears immediately for the
MTC 2 at the selected location.
1 - 31
Student Guide SIPLACE X
Edition 09/2005 13 MTC 2
31
13.2.8.2 "Matrix-tray changer" view
Fig. 13.2 - 9 "Matrix-tray changer" view (Example: location 2)
Key
1. Selected cassette
2. Levels in the cassette
3. View of the location
4. Status indicator for tower 1
5. Status indicator for tower 2
6. Display of component level and occupancy of the selected cassette
7. Selected list entry for a level
Terms used for the occupancy of a cassette 13
– Status
Status indicator for the current component level
–
Component level
Current and maximum component level
(The component level is updated approximately every 30 seconds during placement.)
–
Level
Number of the level (A cassette is subdivided into 6 or 10 levels.)
1
2
3
6
7
4
5
1 - 32
Student Guide SIPLACE X
13 MTC 2 Edition 09/2005
32
– Division
Number of the component division in the waffle pack tray
(A maximum of 150 divisions can be defined.)
–
Component name
Name of the corresponding component in the waffle pack tray
Functions in the "Matrix-tray changer" view 13
"Go to refill position" button
The MTC 2 moves the tower to the refill position of the selected cassette.
The status indicator of the active tower turns yellow.
"Finish refilling position" button
Refilling is completed and placement with the selected cassette continues.
The status indicator of the active tower turns green.
NOTE
If
"With occupation check" is selected, the set-up of the refilled cassette is checked by moving
to every level of the selected cassette.
The result of the check is displayed in a separate dialog box.
"Feed tray" button
The selected waffle pack tray is moved out and into the transfer position
NOTE
If there is already a waffle pack tray in the transfer position, it is first moved back to the tower.
"Mech. functions..." button
Calls the single functions for the MTC 2, see section 13.2.9 "Single functions of the MTC 2".
"Single magazine" field:
"In operation" button
The waffle pack tray in the selected level is put into operation, which means that components can
be picked up from it. The component filling level for this level is displayed in green in the table.