SiplaceX4_en - 第7页
1 - 5 S tudent Guide SIPLACE X Edition 09/2005 Course Contents 5 Head modularity: – Reasons for an d sequence of th e head exchang e – Exchange the pla cement head with compone nt camera – Exchange of the nozzle changer …
1 - 4
Student Guide Siplace X
Course Contents Edition 09/2005
4
Twin Head:
– General overview
– Demonstration and explanation of the head reference run
– Pick up and placement cycle on the twin head
– Structure and functionality of the head
– Exchanging the twin head
– Spare parts replacement and adjustments at the twin head
– Axis controlling and positioning of the twin head axis
– Vacuum system
– Control of the track signals
Calibration:
– Components of the User Interface
– Overview of the machine calibration
– Zero Point Corrections on the C&P and P&P heads
– Carry out the Calibration with single calibration menus and complete machine calibration
– Control of the track signals
Pneumatic Tape cutter (Docking unit):
– General information
– Preparation and removal of the Tape cutter
– Cutter blade and spare part exchange on the tape cutter
– Reinstallation of the tape cutter
– Functional check in the machine
Transport system:
– General Information and technical data about single and dual conveyor
– Mechanical structure and functionality of the conveyor
– Configuration flexible dual conveyor
– Electrically structure and communication to the machine via the transport control board
– Spare part replacement and adjustment work at the conveyor
– Calibrate and adjustments of the conveyor
– Configuration of the flexible conveyor
1 - 5
Student Guide SIPLACE X
Edition 09/2005 Course Contents
5
Head modularity:
– Reasons for and sequence of the head exchange
– Exchange the placement head with component camera
– Exchange of the nozzle changer
– Configuration at SIPLACE Pro and in SITEST
– Zero point corrections
– Calibration of the "new machine"
– Run 1st placement program
Component handling:
– Handling of the S- and X-Feeder and component tables
– Removing the component table
– Mechanical construction and functionality
– Adjustments on the component table
– Remount and test component table
Matrix Tray Changer 2:
– General Information
– MTC 2 specific safety instruction
– Parts overview of the machine (terminology)
– Adjustment the basic level and adjustment of the MTC into the machine
– Preparation, removal and installation of MTC
– Communication between Siplace X and MTC 2
– Placement function MTC 2
– Single function MTC 2
– Reference Run of the MTC 2
– Calibration and adjustment of positions on the feed and lift axis
– Download to the Masterdrives
– Machine data
Installation:
– Setting up and leveling a SIPLACE X
– Installation of the operating system and the stationsoftware
1 - 6
Student Guide Siplace X
Course Contents Edition 09/2005
6
Caccia:
– Overview and general information
– Download of application
– Practical exercise
New feature SW 601:
– Software Windows XP
– Support of the X feeder and options
– Face down recognition of components
– Station wise download
– 0201 placement process
– Flexible configuration of the nozzle changer C&P head
– Free configuration of the Twin head nozzle changer
– Recovery Placement
– Dynamic editing
– Number of re-picks
Preventive Maintenance:
– Maintenance Schedule
– Equipment and tools needed for Maintenance
– Maintenance cycles