SIPLACE S-23 HM User Manual - 第18页
18 Operat or Guidance ’‘SIPLACE S-2 3 HM - Main vie w’ menu (user level: ’operator ’) Y ou can cont rol the operati on of the machine from the main view . ↑ UM 3.3 All of the menu s and options accessib le to the oper at…
17
● Check that the z axes of all placement and glue application heads are in
their top end position.
● Check whether there are still components on the placement heads.
● Move all gantries into the standby position.
● Click on the ’Shut down computer’ option in the ’Operation’ menu.
This will end all the processes running on the station computer. A prompt
will then appear on screen, telling you that you can safely switch off the
computer.
● You can now switch off the placement system at the main switch.
PLEASE NOTE:
If you switch off the placement system while it is in use without first cor-
rectly shutting down the station computer, the computer might not start
again the next time you start up the line.
18
Operator Guidance
’‘SIPLACE S-23 HM - Main view’ menu (user level: ’operator’)
You can control the operation of the machine from the main view.
↑ UM 3.3 All of the menus and options accessible to the operator can be accessed
from the main view. Menus to which the operator has no access and
options which have not been activated are grayed out. You can jump
directly back to the main view at any time from a menu. If you have
changed any settings, a query box will be displayed asking you to save or
discard the changes.
a
-
f
Buttons for machine control
a
Process
s
Stop processing
d
Continue processing
f
Abort processing
g
Error information
If an error has occured, you can obtain more details concerning the error
in this submenu.
h
Diagnostics
If an error occurs while a board is being processed, you can start this
diagnostics program in order to analyze and correct the error.
j
Clear error
Click on this button and the error message will be removed from the
screen. For reference purposes the error will continue to be held in the
errors list.
k
This displays the file name of the job, the cluster that was loaded and the
set-up.
l
-
H
Buttons and icons for calling menus for machine control
l
Machine options
;
Display main view
A
Display setup and component verification with barcode
S
Display errors
D
PCB feeders
F
SF gantries 1 and 2
G SF PCB transport 1 and SF PCB transport 2 (you cannot access the SF
PCB transport 2 menu unless the twin conveyor option has been
installed.)
H GEM status, placement program and terminal service (option)
J Display of the machine‘s operating mode: line computer, GEM host,
stand-alone
; ASD F G H
a
df
g
h
j
s
l
K
J
k
19
K
Menu line with pull-down menus
Via these pull-down menus you also have access to all of those functions
and options which you require for machine control.
’Machine options’ menu
● Click on the Machine options button in the main view. The Machine
options control box opens, displaying the options installed and the config-
uration of the machine. Activated options are marked with a cross in the
corresponding check boxes.
● Press Cancel to leave the menu without saving changes and press Accept
to save the changes.
You should however note that for certain options you will need line engi-
neer access authorization as these options can only be activated or deac-
tivated by persons with that authorization.
↑ UM 3
↑ UM 4
↑ UM 11