SIPLACE S-23 HM User Manual - 第22页
22 ’Display errors’ me nu From the E rror hand ling menu you can acc ess the lists corres ponding t o ↑ UM 4.2 the followin g error types: – Track errors – Machine er rors – Transport errors – General er rors The top lin…
21
Component verification with barcode’ menu
The Component verification with barcode menu cannot be accessed
↑ UM 4.1.2 unless you have configured the Component verification with barcode
option in the machine options and a track barcode has been defined for
the component.
The barcode can be
– read off from the reel with the barcode pen or
– entered manually via the Manual input button.
a
The data for the selected track are displayed here.
s
Manual input
You can enter the barcode manually. The barcode you have entered is
compared with the configured data and the result shown in the Barcode
compare window. The result displayed is either ’same’ or ’different’
h
.
d
Acceptable barcodes
When you click on this button a display box will be displayed which con-
tains a list of (currently) 6 acceptable barcodes.
NOTE
If one position in the barcode is an asterisk (*), this position will not be
included in the barcode comparison.
f
Compare barcode
The result of the barcode comparison is either same or different
h
.
g Set track full
If the barcode read in is the same as the barcode stipulated and if the
track is empty, click on the Set track full button or use the component bar-
code reader to read the RET barcode on the barcode strip.
adfs g
h
Filter location
22
’Display errors’ menu
From the Error handling menu you can access the lists corresponding to
↑ UM 4.2 the following error types:
– Track errors
– Machine errors
– Transport errors
– General errors
The top line will always show the last error to occur.
a
Button for accessing the track errors menu
s
Button for accessing the machine errors menu
d
Button for accessing the transport errors menu
f
Button for accessing the general errors menu
g
List of errors with title bar
Key to the abbreviations in the title bar:
No.: Error number
CmpName: Name of the component
Loc.: Component location
Tr/D/T: Track / division / tray
Seg: Number of the segment which was used for placing the component
#E: Error counter - The error counter shows how often this error has already
occured.
Text: Explanatory text
The following abbreviations may also be encountered with other
error types:
DEV.: The originator of the error message, e.g. gantry 1, etc.
Transp.: Conveyor belt affected:
1 = Standard conveyor
2 = 2nd conveyor when the twin conveyor option has been installed
Info 1 or 2: Information of relevance to Siemens only.
h
Diagnostics
Select one particular error line in the list and click on Diagnostics. The
diagnostics program will be started.
j
Error information
Additional information concerning the marked errors is displayed by the
information and help system.
k Delete all
Click on this button to delete all the errors of the same type. If a track is
empty, it must be filled before deleting.
g
hjk
a
s
d
f
23
Feeders’ menu
The Feeders menu has four submenus for querying or checking the status
↑ UM 4.3 of all feeder modules:
– Displaying empty tracks and setting them full
– Omit components. (This menu can only be accessed from the ’Line engi-
neer’ operator control level or higher).
– Displaying magazines and changing inventory levels
– Displaying and vibrating linear feeders
With the 80F placement machine there is an additional submenu, Func-
tions with the wafflepack changer.
’Display and refill empty tracks’ menu
The empty tracks of feeder modules are displayed in this menu. After fill-
ing, you can set the tracks to full.
↑ UM 4.3.1 Depending on the option which has been activated, the following sub-
menus will be called:
’Display empty tracks without component verification’
● When you click on the button for location 1, 2, 3 or 4, the entire location
which you selected will be set to full.
● When you select a particular feeder module in the list section and then
click on the Selected track button, the individual track will be set to full.