IT Feeder Manual-SM320(English V2.0)Ver1 - 第38页
Samsung Intelligent Feeder System Figur e 1-28. Splici ng dialog box Splice the new part reel and read the part reel barco de with the barcode reader . If the barcode is input successfully , two types of pa rt reel infor…
IT Feeder System
1-25
-②: The feeder installed in the slot that is not assigned by the PCB Program
①②
Figure 1-27. Indication of Mismatch Error occurence
③ The procedure to restore the Mismatch Error is as follows.
Locate the feeder in which the error has occurred from the error list.
Move the feeder to the slot that does not use the mismatch error feeder and
install the feeder in it.
Confirm that the moved feeder is added to the dummy list.
Check if a feeder whose type and part name is identical to those of the feeder
in the slot where an error has occurred exists in the dummy list.
If it exists, move the feeder to the corresponding empty error slot and install
the feeder in the slot.
If it does not exist, install a new feeder.
1.4.10. Splicing Part Reel
Used in case the shortage warning occurs or when splicing reels is necessary.
Select the slot where the reels are to be spliced in the IT Feeder Manager screen.
Select the splicing function (Feeder-> Splicing) in the menu. Then the Splicing dialog
box is created as shown in Figure. 1-28, which displays the information of the feeder
slot currently selected.
Samsung Intelligent Feeder System
Figure 1-28. Splicing dialog box
Splice the new part reel and read the part reel barcode with the barcode reader. If the
barcode is input successfully, two types of part reel information are displayed in the
screen as shown in Figure. 1-29.
Figure 1-29. Splicing completed screen
< Click the <OK> button to complete the splicing. Then the part reel count applied to
the IT Feeder Manager is indicated.
1-26
IT Feeder System
1-27
Figure 1-30. Splicing Completion Indication of IT Feeder Manager