IT Feeder Manual-SM320(English V2.0)Ver1 - 第86页
Samsung Intelligent Feeder System Figur e 3-21. Feeder information modification screen Description of the screen Feeder ID Reads in the Feeder ID with the RF-ID Reader . Feeder T ype Selects the Feeder type of the …
Feeder Station
3.4. Config menu
When the Config. Menu is selected on the Main menu bar, the following submenus
appear.
Figure 3-19. Config menu submenus
Consists of menus indicating whether to display the tool bar or the status bar, Modify
Feeder, and System Config menus.
3.4.1. Tool Bar
The user can display or hide the tool bar by changing the Tool bar to On/Off in Config. of
the Main menu.
It also provides a brief description of the menu. When the mouse pointer is located on a
button on the tool bar, a brief tool tip appears in a small box. And a description of the
menu appears in the status bar below.
Figure 3-20. ToolBar screen
3.4.2. Status Bar
The user can display or hide the status bar by changing the Status bar to On/Off in Config.
of the Main menu.
When connecting with the database, the status is displayed as follows
When the connection with the database is disconnected, the status is displayed as follows.
3.4.3. Modify Feeder[Ctrl+M]
The screen to modify the Feeder information. To execute it, select the Modify Feeder
menu from Config. of the Main menu or press the [Ctrl + M] key on the keyboard.
3-15
Samsung Intelligent Feeder System
Figure 3-21. Feeder information modification screen
Description of the screen
Feeder ID
Reads in the Feeder ID with the RF-ID Reader.
Feeder Type
Selects the Feeder type of the selected Feeder.
Description
Enters a brief description on the Feeder.
Save
Saves the modified information in the DB.
Delete
Deletes a Feeder from the DB.
Close
Closes the screen and ends modification.
3-16
Feeder Station
3.4.4. System Config[F9]
Sets the environment for Feeder Station System.
Figure 3-22. System Configuration screen
To execute it, select the System Config. menu from Config. of the Main menu, press the
button on the tool bar, or press the [F9] key on the keyboard.
Description of the screen
Database
Used Database : Determines whether to use the database. In case the
database is not used, the program is executed in the Stand Alone mode.
User ID : Enter the user ID to access the database.
Password : Enter the password to access the database.
Net Service : Enter the Net Service to access the database.
Docking Slot
Count : Enter the number of docking slots to be connected in the feeder
station.
Password
New Password : Enter the new password that is entered when deleting the
part reel or when using the System Configuration menu.
Confirm Password : Confirm the newly entered password.
Feeder Scanner
The set up screen for the Feeder RF-ID scanner. The Serial Port should be set.
Barcode Scanner Type
There are two types of barcode scanners; keyboard type and serial type.
KeyBoard Edge type is supported by Feeder Station.
If help is needed to specify Serial Parameter when setting up the Serial Port type,
3-17