EUS0153210_YFact_Standard_E - 第109页

2-75 2 Board Explorer 9. Program List Editor T o per form automatic program change-over production of IT -Option, the linkage between production model names (ASSY No.) and board program names must be registered before st…

2-74

Board Explorer

8.3 About the error kind and method of the restoration

What is the name repetition error......?

•Two or more Board data of the same name exist in one machine.

•Or, the Board data of the same name exist in a different Board number between machines.

Itbecomesanamerepetitionerrorwhenapplyingtotwoabove-mentionedscases.

Method of restoring name repetition error

•WhentheBoarddataofthesamenameexistsinthemachine,theBoarddatausuallyreadisleft,andtherestis

deleted.

•Whenthenameoverlapsbetweenmachines,thecorrespondenceoftheBoardnumberismeasuredanditrestoresit.

What is the number repetition error......?

•Two or more Board names exist in one Board number.

Itbecomesanumberrepetitionerrorwhenapplyingtotheabove-mentionedcase.

Method of restoring number repetition error

•The overlapping Board data is moved to the Board number that has become empty.

The Board data is not deleted.

However, it is necessary to delete either data if the board data cannot be moved (in case of maximum number of VIOS

boards).

The method of selecting the deleted Board data is the same as a past method.

* The Board number is a number treated internally in the management of the VIOS Board.

2-75

Board Explorer

9. Program List Editor

To perform automatic program change-over production of IT-Option, the linkage between production model

names (ASSY No.) and board program names must be registered before start production. This linkage

information is used to call the board program name from the information read by a fixed reader or hand-held

reader. This setting can be made in the Program List Editor. The Program List Editor allows registration of a

total of 10 board program names for each production model name. If a different program name is used for

each machine of one production line, "Contrast Program Name Number" to be used for each machine must

be set. For "contrast program name number", refer to the separate "IT option Automatic Program Change-

Over" manual.

CAUTION

The Program List Editor requires the Automatic Program Change-Over. For details on this setting, refer to the separate

"IT option Automatic Program Change-Over" manual.

9.1 Start of the Program List Editor

Startbyselecting[ProgramListEditor]fromthe[Data]menu.Therearenospecificstartconditions.

Start of the Program List Editor (Board Explorer)

642E1-S0-10

2-76

Board Explorer

9.2 Open and Save

Theprogramlistdataisopenedandsavedbythe[File]menu.

Program List Editor Menu (File)

642E2-S0-00

Menu Items Operation

Create New Program List

Create new program list.

When there is the program list being edited now, it is closed.

Open Program List Select the program list already registered and open it.

Save Program List Save the program list being edited now.

Save Program List As Save the program list being edited now as another file name.

Reread Program List Reread the program list without saving it. The data being edited is discarded.

Exit Exit the Program List Editor.

Whenfollowingdialogisdisplayedwhileopeningtheprogramlist,selectedprogramlistfilecan’tberead

because other application is opening it already. That dialog is displayed “Equipment under edit”. Check this

equipment.

Warning Dialog

642E3-S0-00